Hornywell 40pc series rapid response < 1ms
It is a small, reliable and cost-effective sensor that has extensive applications in the areas of automated capture, packaging, medical vacuum treatment, car brake support, hvac wind pressure monitoring and laboratory equipment vacuum control。
Core characteristics
Scheduling:
The standard covers 1,500 psi (e. G. 40pc001g/015g/030g/100g/500g) and special needs may be customized for 1000 psi。
Output signal
Simulation of voltage output: usually 0~5v dc or 0. 5~4. 5v dc ratio output, compatible with most plcs, controllers and collecting systems。
High precision and stability
Precision: ±0. 25% fs (full range) or higher, applicable to precision control。
Temperature drift compensation: built-in temperature compensation (-40°c ~ + 125°c) to reduce the impact of changes in ambient temperature on measurement。
Media compatibility
Liquid material: stainless membranes (e. G. 316l) separators that measure gases, non-corrosive liquids (oil, water, etc.) and avoid medium pollution sensor elements。
Electrical and environmental characteristics
Electricity voltage: typical 5v dc (usually 5-12v)。
Protection level: dustproof。
Working temperature: -40°c ~ 125°c adapted to extreme industrial conditions。
Typical application scenario
Industrial automation: pressure control of gas-activated systems, compressor control。
Hvac systems wind pipe pressure, filter jam detection。
Medical equipment: respirator, oxygen pressure feedback。
Test equipment: leak detection, pressure calibration。
Model
40pc001b1a ±50 mm hg 2-way 1-unformed
40pc001b2a > 50 mm/hg two-way away from port
40pc001b3a ± 50 mm hg 2-way 3-way port
40pc015g1a 0-15psi unformed
40pc015g2a 0-15psi remote port formation
40pc015g3a 0-15psi to port
40pc100g1a 0-100psi unformed
40pc100g2a 0-100psi remote port formation
40pc100g3a 0-100psi towards port
40pc150g1a 0-150psi unformed
40pc150g2a 0-150psi long distance port formation
40pc150g3a 0-150psi towards port
40pc250g1a 0-250psi unformed
40pc250g2a 0-250psi remote port formation
40pc250g3a 0-250psi towards port
Vacuum negative pressure model: 0 to 15 psi
40pc015v1a
40pc015v2a
40pc015v3a
