Instrument calibration and maintenance
Periodic calibration: ensure accuracy and reliability of the calfeh micro-water meter, regularly use standard samples for calibration, check and adjust the instrument's measurement accuracy。
Day-to-day maintenance: keep the instruments clean and dry and periodically replace ageing or damaged components, such as electrolytic tanks, drip tubes, etc., to ensure the proper operation of the instruments。
Sampling and preparation
representative sample: ensure that the sample taken is representative and that the water content of the substance to be measured is true. Avoid contamination or chemical change of samples。
Pyramid sample pre-treatment: depending on the nature and characteristics of the sample, appropriate pre-treatment, such as grinding, drying, etc., is carried out to remove interference in the sample。
(b) the correct operation: the operation is carried out in strict compliance with the instrument's operating procedures and the error caused by the error is avoided. During the drip determination process, the drip velocity and mixing velocity need to be strictly controlled to ensure the accuracy of the measured results。
(b) avoid interference with the luminium: during calfessium calculator measurements, the exchange of samples with water or other volatile substances in air is avoided to reduce errors. At the same time, care is taken to avoid the effects of factors such as electromagnetic interference and vibration on the measurement results。
Accurate reading: when reading the measurements, ensure that the vision is vertical with the screen to reduce visual error. At the same time, care is taken to record the units and accuracy of the measurements。
Control of environmental factors
temperature control: keep temperature constant in the measured environment and avoid the effects of temperature changes on the measured results. Normally, calfessor microwater gauges are measured at room temperature。
Magnesium control: controls measure the humidity of the environment to avoid interference with measurements by water in the air. In high-moisture environments, dehumidisation measures can be taken to reduce humidity。
Data analysis and processing
Duplicate measurements: multiple double measurements of the same sample, using averages as the end result to reduce the effect of accidental errors。
abnormal value processing: in the analysis of data, care is taken to identify and process abnormalities. Measurements that clearly deviate from normal ranges should be reviewed or remeasured。
Results against results: measurements are compared to standard values or historical data, sources of errors are analysed and measures are taken to improve them。
In summary, the use of the calfessor calibration calibration calibration calibration, sample processing and preparation, operational norms and care, environmental factor control and data analysis and processing measures can be effective in avoiding errors and improving the accuracy and reliability of measurements。
From http://www. Sdjbqsb. Com