Iii. German hp technik advantage
At present, hp technik heavy electric pumps can be used to equip pumps with a standard rotary currenter b3/b14 or b3/b5,230 v, 400 v, 50 hz, 1400 rpm, protection level ip 55, insulation level f
From 4 kw, power runs under 400/690 v, 50 hz
A fluid of up to 2 - 150 cst can be transported。
Germanyhp technik industrial pump smg 1930-d-4-15-h1 for lubrication and hydraulic fluid transport
I. German market situation hp technik
At present, the boiler industry, ship boilers, industrial refining oils, when delivering high viscosity hydraulic oils, lubricants, all heating oils, kerosene oils, kerosene, etc., are used extensively in the interior of the country with dense oil pumps, which are generally a medium for delivering pure or minor contamination, e. G. Paints, paraffins, synthetic resins; when delivering fluids with a viscity of 2 - 150 cst, it is recommended to use german hp technik heavy fuel or diesel fuel pumps
Ii. Hp technik brand introduction in germany
Hp technik, germany, originally originated in karlsruhe in 1970; the production and extension of equipment components for its own pumping process began in 1976; in 1985 it was officially renamed: hp technik gmb; in 2012 hptechnik expanded its delivery to include fuel burners and industrial nozzles in addition to the main heavy oil pumps; and in 2020 it was expanding its product range to include “oil heating plugs and burners”
Iv. Hp technik model
Hp technik b-gh-pro-4
Hp technik b-gh-pro-2
Hp technik vbgrpp-d-2-20-hc/bh1
Hp technik vbhrm-d-4-10-bh1
Hp technik vbgm-d-2-20-hc/bh1
Hp technik vbhg p
Hp technik vbhg pz
Hp technik vbhg m
Hp technik vbhg g
Hp technik vbhg f
Hp technik umg-1211
Hp technik uhe-a2-pz-i-4-20
Hp technik uhe-a3-p
Hp technik uhe-a4-m
Hp technik uhe-a5-gz
Hp technik smg 1568-i-4-10-bh1
V. Hp technik installation
Hp technik installation
1. The installation shall complete the alignment of the pumping and drive axes on the axis and shall not have a routing effect. In addition, it is necessary to use coaxies suitable for the size and weight of the axle of the pump and not to transfer any imbalance to the pump。
2. The axle-way gap between half of the axis shall be the maximum. 1. 5 mm. Rotation axis parts shall not be axially exposed to any fixed pump or engine parts
3. All plastic covers must be removed before connections are made。
4. All connectors and lines shall be installed without tension and closeness. We recommend the use of seals made of copper or aluminium only. Never use cannabis or similar materials. Before connecting to the pump, any stains and metal particles in the pipe must be removed
In the dual-pipe system, the reflow line must be directed back to the tank and may not be shut down. Otherwise, the ultra-pressure protection of the pump will no longer work。
6. Inhalation links to pumps (see figures 1 and 2) are full of oil. Then connect the inhaler tube to screw connector a."
7. Pressure/transmitting line connects to screw connection s, side pipe connects to thread connect r”
8. Before opening the pump, check all lock valves in the pipe and check if the pump has enough media to use
