Kazido protect biotac ep 2
Description
Garsedobiotic ep 2 is based on synthetic ester oil and lithium calcium soap as a denser agent, mainly for use in sealines
Apply. It's a base oil formulation for rapid biodegradability。
Apply
Biotac ep 2 applies to the lubrication of steel wire. It has high mechanical stability and high water resistance. It's..
It also contains a specially selected additive to improve the protection of systems against corrosion, increase their resistance to oxidation and provide very high levels of protection
Good carrying capacity. It's a synthetic basic fluid and a variety of things that make the central heat pump very smooth
System。
Recommended work temperature range: -35 + 120 °c.
Characteristics/advantages
Biotic ep 2 provides a comparison of improved marine biodegradation potential with traditional lubricant。
The lubricant in ideal applications may enter the marine environment。
Good pump delivery at lower temperatures facilitates the use of pressurized lubricants。
Application of water sprayed resistance to reduce frequency。
Good pressure and corrosive performance to protect added value of equipment。
Additional information
The application of traditional lubricant to wire ropes can also be used for exclusive pressure lubricating by
The manufacturer's instructions may assist in the application of an appropriate amount of lubricant to protect steel wire cores。
Care should be taken to ensure that only one membrane lubricant is used on the outer surface of the wire. Slide
It could cause pollution in the surrounding area
Model data test method unit biotac ep 2
Nlgi viscosity level astm d217-2
Dynamite - lithium calcium soap
Infiltration, work (0. 1 mm) astm d217-265-295
Motion viscosity@40°castm d446cst105
Dot astm d566°c >170
Working temperature, small/-°c-35-120
Four-ball test, welding point astm d2596kg240
Corrosion resistant, distilling water ip 220-0
Corrosion resistant, in synthetic water ip 220-1
Copper corrosion, din 51 811-1 at 60°c 24 hours
Aircol pg 185 synthetic compressor oil
Product description;
Aircol pg 185-olefin polymer, a high performance synthetic compressor oil from hydrocarbons and chemical gases from lube compressors。
Aircol185 has low solvency properties; with hydrocarbons and chemical gases, it enters the arcs of the compressor, thus avoiding a significant decline in viscosity and lubrication. Fully synthesized, such products are not subject to mineral oil trends, breaking or polymerise formation of rubber, resin and carbon. It has a high viscosity index, which operates at an effective temperature。
Apply
Aircol pg 185 has good lubricating properties and high standards
A viscosity index for high temperature operations. It's working water used to rotate and repeat compressors. The pit
The lubricant is compressed by continuous exposure. If mineral oil is used in these applications
Gases dissolve and lead to a sharp decrease in the viscosity of crude oil, which may in turn lead to compressor failure. Hydrocarbon gases
Dissolved to a lesser extent to aircol pg 185 in caterina to ensure that no more work life and adequate lubrication performance。
Characteristics/advantages:
Catalan aircol pg 185 low-repayability chemical gas, which enters arc tank gas
Compressor, thus avoiding a significant decrease in viscosity. Yes
A typical data test method unit, aircol pg185
Density@castm d4052kg/m30. 83
Movement viscosity@40°castm d445mm2/s185
Motion viscosity@100°castm d445mm2/s35
Sticky index astm d2270-200
Flash point astm d92°c>200
Inclination point astm d97°c-30
Foam test
Foam test