Protein thermal retardation online, prototype: dp-8150
Dp-8150 pure thermal retardator
1) product characteristics and applications
*led backlight 2. 8 inch colour smart controller with clear display and low effort。
* with three curves:
Real-time curve: intuitively show what happened and what happened。
History curve: a curve of any period of time during run-off can be consulted。
Compatible curve: an intuitive display of convulsion diagrams of operational data (using a sub-twice)。
* multilingual switching。
*accuracy temperature measurements with a resolution of 0. 01 degrees。
*slurry thermal resistance and sedimentation rates are measured simultaneously。
* users can calculate annual stain thermal resistance by condensing curves。
*the sensor has a current amplifier in front of the sensor, which can extend the connection between the instrument and the sensor
(greater than 500 m transmission distance)
*photomos photorelays with four-way independent control, with unlimited lifetime。
The alarm, control, pulse output, etc. Can be assembled at any time。
* two-way separation 0/4-20ma output, organized。
Both roads are isolated
* 485 communications separated along the way and configured as modbus communications。
*to be used in many industries such as industrial water, chemical, environmental, printing, metallurgy, electronics, plating, water treatment and farming。
Dp-8150 protein thermal retardator
Measurement range 0-9. 999*10-4m2k/w
Measure resolution 0. 001
Display mode 320*240 pixels colour colour, led screen
Relay output photomos-ray relays, 4th class
Available in: alarm, control, pulse mode 60vdc/1a (load)
Current output isolation, resolution: 0. 0003ma, accuracy: ±0. 01ma
Available as measured or temperature output (0/4-20ma)
Refresh rate: 0. 5s
Power supply (18-30) vdc
Power consumption: 3w
Working conditions
Working temperature: -10 ~75 °c
Humidity: 0-95%, no spots
Insulation level: 2
Level of contamination: 2
Dimensions
Outer dimensions: 120 x 120 x 59 mm (long x width x depth)
Capped size: 112 x 112 mm (drive installation)
Packaging case
Protection level: nema4x/ip65 (front panel)
Disk gaskets: chlorbutyl rubber
Screen: synthetic polyester
Keys: 8 sealed silicone keys
Weight: approximately 300g
Multifunctional pinker physicometry tester, particle and powder characteristics analyser, powder integrated tester model: dp16873
Dp16873 particle and powder characterization analyser (multifunctional)
Dp16873 particle and powder properties analyser, particle and powder characteristics analyser, which provides a test platform and solution for the integrated analysis of the physical properties of powder and particles. Powder physics characteristics are: particle distribution, surface area, loose density, perforation, true density, particle adsorption, surface energy, surface charge, aperture distribution, wet content, resistance strength, shear strength, etc. The instrument is mainly achieved through operation and computational error from human factors in contact with the test process through automated control techniques, through optical, electrical, control electronics for testing of powder and particles; test processes and test results are expressed through software curves and automatically generated reports; data on powder particles are provided in the form of reliable and accurate data.
Dp16873 particle and powder characterization analyser parameters and functional description:
1. Vibration density: after measuring the data by a defined volume or mass method, automatically calculating the density of the vibration. ... After measuring the density of the vibration and the density of the loose, the data are obtained directly from hausner ratio hausnaby (intensity/flag density) and the compressive index (intensity-fence density/fence density x 100). Set the vibration frequency and the vibration and the number of vibrations or times when the data are obtained.
2. Pumping (natural accumulation) density: filling the container mass after a certain mass powder flows naturally through the aperture funnel; it does not need to be displayed directly in the configuration of the mass scales, the data are displayed and the density of the loose (natural accumulation) is calculated automatically.
3. Cemetery angles (stop angles): automatic access to angle data without manual computation and manipulation; configuration of automatic mixers to address less mobile powders and particle tests, which flow automatically through control valves, and real-time collection by probes of data from stacks changing in an inconvenient time stacking angle, and access to flow time and process curves of corner, mass and time, volume and time change.
4. Mobility time: a certain mass is automatically acquired by the time of the funnel, without manual operation, and automatically starts and stops the timing. Flow-testing volume and quality method obtains quality and time; volume versus time-related data.
5. Crash corner and square corner: data obtained directly; differential data obtained directly from stop and crash corner.
Spacing rate: spacing rate is the percentage of the total powder volume in the powder. Direct access to spatial data, which does not require additional weighing and computation, varies depending on the particle shape, sequencing structure, particle size etc. Of the powder. Powder space is around 40% when the particles are spherical; or between 70-80% when the particles are super fine or irregular. High
Cutting: powder cutting strength test (selection)
8. Time frame: 0-99999s arbitrary
9. Quantification range: 0-2000g; precision 0. 01g
10. Funnel volume: 200 ml
11. Packaging capacity: 200 ml, 250 ml, 500 ml stainless steel (selected according to user needs)
12. Interrupted angle measuring discs: 100 mm in diameter; automatic mixing devices to address the mobility of particles.
13. Funnel exit with control valves
14. Cal. 2. 5; 4. 0; 5. 0; 6. 0; 7. 0; 8. 0; 9. 0; 10; 14; 15; 16; 17; 18; 25 (selected on the basis of user needs)
15. Presentation: lcd display, numerical key manipulation
16. Mobility index: no manual calculations, automatic conversion of index data when required
17. Enter: 220v (1)(10%) in a constant temperature environment
Colour image watch digital fields stronger model: dp-9000a
1. Digital television tft 4. 5 inch colour image surveillance with good visual effects。
Qam performance indicator test analysis - average power, mer, ber, constellation。
Simulation of television indicator tests - levelling, v/a, c/n, tilt, automatic detection
4. Spectrum analysis function that can truly reflect the actual channel spectrum
Support multiple dvd models: 16qam, 32qam, 64qam, 128qam, 256qam。
Widescale ratio setting: 1ms/s-7ms/s。
7. Qpsk cofdm power test。
8. Automatic simulation, digital channel creation, applicable to any network detection。
9. Tft 4. 5-inch colour image surveillance with good visual effects。
10. Rapid charging, with long, continuous working hours of three hours, is appropriate for various measurement needs。
11. Positive, reverse-repeated signal transmission measurement function。
Frequency spectrum analysis function
Frequency range: 5-870 mhz l
Spectrum bandwidth: 125 mhz, 62. 5 mhz, 12. 5 mhz, 6. 25 mhzl
Level test range: 10 dbmv ~ 120 dbmv
Digital dvd measurement indicator
Frequency range: 46/5 mhz ~ 870 mhz l
Digital average power: 20 dbmv ~ 110 dbmv
Electricity level resolution: 0. 1 db
Equivalent: ±2dbl
Mer: 22db ~ 39db (64 qam)
Mer precision: ±2db
Bit error ber: r-s ex 1e-2 ~1e-9
Supporting mode of decomposition: dvd-c/itu-t j. 83-annex a
Standard, 16/32/64/128/256qam l power support: qam, qpsk, cofdm et al
Rate: 1ms/s ~8ms/s
Bandwidth: users can set themselves
Model television measurements
L frequency range: 46/5 mhz ~ 870 mhz
L scale range: 25db ~120db ~v
L electrical level resolution: 0. 1 db electron level accuracy: ±1. 5 db
Input resistance: 75 times l
Other test functions: slope measurements, trunk voltage measurements, etc
Outer dimension: 170X225x60mm
Continuous working hours: 3 hours/sufficient electricity
Interface display: chinese, menu interface display
Channel scan: total number of channels scanned 150 additional channels
Electricity: 12v/2400mah nickel hydrogen batteryl
Charger: ac 90 ~ 240v 50/60hz