





Description of the product of the one-body hydraulic pillar tank cleaner:
The tank cleaner, also known as the tank cleaner, is used for the tank under the single hydraulic pillar, the active column is used under the well, and the tank, the coal sludge stored inside the column, dust, dirt etc. Are quickly cleaned, with the desired effect of derusting, polishing and cleaning the oil。
Application area
Coal mining
Operation of washing machines
1. Comply with the general operating procedures for mechanical equipment。
2. Pre-service compliance with:
A. Check for leaks in piped systems and, if so, notify the maintenance staff of the repairs。
B. Check the adequacy of the cleaning fluid and, if not, increase it in a timely manner。
C. Order a test vehicle, followed by two to three minutes by air, to check the smoothness of the motion of the moving system (electrical motors, joint knots, and transport belts) and confirm all normal conditions before production can take place。
3. Work must also comply with:
A. Cleaned tank, etc., to be smoothed to metal brushes in transport vehicles
B. After work, the cleaned tank cannot be parked in the transport vehicle, pressing the stop button to stop the entire aircraft。
C. Cleaning fluids shall be replenished by the regular addition of water and a percentage of detergent washing agents to keep the liquid surface at a certain level and, if the cleaning effect does not meet the requirements of the specified process, shall be replaced in full。


