U. S. F. All synthetic food-grade hot oil
Mobile shc cibus 32 ht
Usf shc cibus 32 ht
Nsf h1 certified heat transfer oil
Product introduction
Mobil shc cibus 32 ht (usf shc cibus 32 ht) is a fully synthetic high-performance heat transfer oil designed to require the use of a closed, indirect heating device certified by nsf h1. Their combinations are resistant to thermal fissure and chemical oxidation, thus extending their useful lives and reducing sediment and oil sludge formation。
Mobil shc cibus 32 ht (usf shc cibus 32 ht) has been carefully selected for effective heat transfer to ensure greater system efficiency. Low viscosity means good mobility at low temperatures, making it easier to activate at colder ambient temperatures。
The mobil shc cibus 32 ht (usf shc cibus 32 ht) has good heat transfer properties, such as heat ratio and high-conductor heat, which can contribute to the rapid dispersion of heat, which can improve the efficiency of the entire system. In addition, the low volatility of mobil shc cibus 32 ht means low consumption。
Mobil shc cibus 32 ht (united states of america shc cibus 32 ht) is certified by nsf h1 and accepted by the canadian food inspection agency and is therefore suitable for occasional exposure to food. At the same time, mobil shc cibus 32 ht (usf shc cibus 32 ht) is produced in facilities meeting iso 22000 and iso 21469 requirements, which helps to ensure a high level of product quality. It is also applicable to kosher and regulated foods, the formulations of which do not contain nuts, pasta, wheat and animal products. It meets the requirements and tests of din 51522 for heat transmission。
Mobile shc cibus 32 ht (usf shc cibus 32 ht) is a certified nsf h1 lubricant produced by exxonmobil, which is used in the food and beverage processing industry。
Characteristics and advantages
Feature
Advantages and potential benefits
Liquids certified by nsf h1
Food and beverage packaging and processing applications for occasional exposure to food
Production at facilities meeting iso 22000 and iso 21469 requirements
Ensuring product quality through independent verification
High viscosity index
Maintaining viscosity and oil membrane thickness at high temperatures helps protect equipment
No wax, low point
High-temperature mobility, easy to start
Anti-heat fragmentation and decomposition
Unoiled mud and focal, low disruption to heat transfer capacity, low maintenance needs
Good heat
It can help to improve the efficiency of heat transfer systems
Application scope
Recommendation for removal and storage
Mobil shc cibus 32 ht (usf shc cibus 32 ht) and other usf shc lubricants are proposed to be stored indoors and separated from other non-h1 lubricants. Ideally, they should be stored in clearly marked, independent designated indoor sites. The drums shall not be stacked below or above other non-h1 lubricants. The new packaging should be sealed intact. The date of shipment, lot number and expiry date are recorded. The date of the first unsealing is recorded and the lubricant is rotated with appropriate inventory. Please close all packing openings after use. Do not replace oil not used in containers. Use clearly marked specialized equipment for internal transport. When appropriate, mark the machine with the correct h1 lubricant name。
Since the mobil shc cibus 32 ht (usf shc cibus 32 ht) may be compatible with other nsf h1 or non-nsf h1-certified mineral base heat transfer oils, mixed use may reduce their performance and affect their nsf authentication status. It is therefore recommended that the system should be thoroughly cleaned prior to conversion to mobile shc cibus 32 ht (usf shc cibus 32 ht) in order to achieve performance and to meet the nsf h1 certification requirements。
Scope of the heat transfer systemMobil shc cibus 32 ht (united states of america shc cibus 32 ht) proposes to require the use of closed heating and cooling systems in various nsf h1-certified food processing applications. These include meat, fish and beverage processing, ready-to-eat and easy-to-food production and meat food production. In addition, this liquid is not recommended for use in open systems where hot oil is directly exposed to air. If the oil spills out or spills out, the hot mobil shc cibus 32 ht liquid could start fire immediately。
In closed systems, the high working temperature of the tank oil is 280°c and the large surface temperature is 295°c. Large working temperatures of liquids are determined by the length of time exposed to high temperatures (with variations in system design, flow, etc.). Please consult with the original equipment manufacturer to ensure normal work. In addition, the following conditions are proposed: 1) to maintain the flow of heaters, with the number of renaults greater than 10,000; 2) to take measures (in accordance with the guidance of the manufacturer of the heater's original equipment) to avoid a local high-heat flow, which can lead to excessive local surface temperature of heaters and reduce the useful life of liquids. 3) sealed by nitrogen, the exposure of the fluid to oxygen is reduced and exposure to oxygen reduces the useful life of the fluid。
It is recommended that used oil be analysed regularly and that the current mobil shc cibus 32 ht be monitored to enhance its useful life. It is recommended that the liquid's state be examined for the first time one month after the system has been filled with usf shc cibus ht 32 and that the liquid be analysed every six months。
Under fda 21cfr 178/3570, occasional access to food
Mobil shc cibus 32 ht (usf shc cibus 32 ht) was certified by h1 that the product met the requirements of fda 21cfr 178/3570 and could be used as lubricating oil for occasional exposure to food. The product may not be used as a lubricant for direct exposure to food。
Mobil shc cibus 32 ht (usf shc cibus 32 ht) can also be used for closed heating applications in various other industries, such as the chemical, pharmaceutical and plastic industries。
Typical characteristics
Test method
Test
Units
Mobil shc cibus 32 ht
Density at 15°c
Astm d4052
Kg/m3
0. 829
Motion viscosity at 40°c
Astm d 445
Mm2/s
30. 4
Motion viscosity at 100°c
Astm d 445
Mm2/s
5. 91
Sticky index
135
Colour
Astm d1500
0. 5
Come on
Astm d 92
°c
234
Tilt
Astm d 97
°c
- fifty-four
Medium
Astm d 974
Mg kah/g
0. 03
Sulphur content
‹0. 1
