Toyota toyota forklift 7fd/8fd20-30 post bridge turning towards bridge shell 43102-36600-71
The shift of the forklift to the bridge, which is anchored on the forklift under the frame of the forklift at both ends of the shell, as well as when the static and empty vehicles are travelling, is mainly caused by the weight of the forklift couter weight and the self-heaviness of the whole vehicle net weight, in view of the design position of the forklift installation, the failure of the forklift due to the heavy condition of the forklift and the prolonged use of overload overloads, the uneven condition of the ground, frequent shifts, and the failure to maintain the post-day post-bridge lubricants. The more common failures are the irregular loss of the main distribution bearings from the main distribution bearings of the bridge and the main distribution frictions to an irregular ellipse or alien state, the malfunctioning of the forklifts from their operational status is a pre-drive run-off, the severe movement of the rear wheel, the inflexibility of the shift towards the directional wheel and the failure to achieve the established shift angles. In addition to the main distribution bearings of the shells, the installation of the axes occasionally results in a break in the position of the shell abdomen, the installation of faults such as a fractures in the arcs, which are essentially caused by the installation of the hard mass material, the carrying of deformations, defects in the shell welding process, the absence of injury detection after the welding process, the need to improve the quality control standards for the weld gas holes and the welding process, the impact of the forklift during the high-speed journeys, and the effect of the body and impact of the vehicle beyond the design mass and process standards, and the installation of the axes. Other possible causes include the loss of the post-bridge tremors rubber block, wear and tear, and the lack of effective shock-mitigation capacity in the installation of axes and frame chassis, resulting in the fracture of the installation axes and a serious security accident for the entire post-bridge to leave the frame。
