Product name: eaton swer 162c66a
Product type: 162c66a
Product introduction
Locking speed differentials (commonly known as lockers) can lock the axle together and provide 100 for a towed wheelOther organiserIt's available to twist. During the turn, the lock-down differential works in a similar way to the open-speed differential - the wheel can rotate at different speeds. However, when towed, the axes can be mechanically locked together, forcing the wheel to rotate at the same speed. This is particularly useful in off-road situations when a wheel leaves the ground or on a road with very low pull. When locked, the wheel in the air does not receive any twists, as there is no pull and the wheel on the ground receives all twists, thus allowing the vehicle to move。
The speed differential is a mechanical device that allows vehicles to pass through the turn, while maintaining the power of the right and right wheel of the bridge. In the absence of a speed differential, the vehicle will tend to travel in a straight line. The outside tyres rotate and slide, causing tire wear and vehicle instability。
Performance characteristics
L they allow wheels to rotate independently of each other。
I'll.."turn" the driving axis at 90 degrees。
I is the end-retarder of the power transfer system。
L help control pull (if equipped)。
Technical parameters
Origin: united states
Type: eaton detroit locker
Gear transfer ratio: 3. 54 and above
Number of gears: 30
Half axle diameter: 1. 15 inches
Ring gear size: 7. 56 inches
Difference: lock
Axle position: back
Axis: dana super 35
Weight: 17. 03 pounds
Product application
Vehicle usage
Road: street
Cross-country: light range/sand beach movement
Cross-country: rock climbing
On the road: the rally
Road: working truck/trailer
Cross-country: working truck/trailer
Cross-country: cross-country
Road: ring orbit
On the road:
