Quite a bit
Gq-series bars cutter it applies to ordinary carbide steel in various types of condensed concrete in construction work, as well as heat-rolled round and screwdled steel. It can cut flat steel, square steel and horn steel
This series of straight screw wires uses multiple severers, a steel slitter that was newly developed by my company in response to user needs. The main solution to the problem is the incompleteness of the screwdrivers cut by the common cutter, the unevenness, the elliptical angle, the angle of the plane, etc., resulting in the emergence of an incomplete technical difficulty behind the fuse. This series of cut-offs is used to solve all the problems above, thus ensuring the quality of the fuse. Using our company's technology, the electric ionator system, it makes it easier to operate; it is easier to maintain external ionisers; and it is designed rationally, with high cutting power, low noise, low failure rate, easy maintenance, etc., and is the ideal steel substrate for the user unit。
Performance advantages:
1. The equipment is designed in semi-enclosed boxes, with high-speed gears inside the box, which significantly reduces the noise of the machine, while the external clutch is designed to reduce the cumbersome work of machine maintenance, greatly improves the productivity and speed of work, and reduces labour and costs
2. The mechanical principles of the cutter, the structure is well designed, the shearing power is large, the cut-out steel bars are flat, the steel bars are round, non-argued, and have no foot and foot marks. The reduction of fuses is the intensity of work and the reduction of work processes. One cut-off machine provides two to three sets of silk machines that work continuously. (cutting machines need to be sharpened again after cutting, and then again after filamentation, while 3-4 cutters can only be used for a silk machine, with high labour intensity and inefficient work
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The cost of using machines has been significantly reduced。
4. A compulsor for the standardized construction of steel bars。
1. Type of aircraft, small size, compact structure, solid and reliable. Two-headed cuts, high yields and the loss of most labour。
2. Good lubrication performance, with closed structures, with the use of gear spatter to lubricate, with a single filling of around 8kg oil, capable of two months of continuous operation。
3. The reduced functional wear and tear of used steel bars, improved lubrication conditions, the introduction of rolling bearings at the gear end, low resistance, a reduction of one third of the load power and a significant increase in the useful life compared to the type of severer。
4. The machine is designed to be simultaneously cut with a double knife, with one knife at a time per second, twice as many knives as the cutter, and each blade can be followed to the bottom, or multiple types of steel can be placed without rules。
5. The use of used steel-stabbing machines using high-steel blades, poles and high-speed electric appliances is more stable in quality and has a longer useful life。
6. Mobility: mobility, flexibility and maintenance
