Polypropylene preservative tapeIt can have a good embalming effect, but we need to get it right. In addition, we must do something to keep it working. So what are the methods? Let's see them together。
1. Revealing of corrosive tape. There is a need to meet the standards of rust removal and to clean the pipes. After drying up, the surface shall be coated with a decorative paint。
Polypropylene preservative tape shall be entangled with specialized equipment, and the piping shall be rotated at a certain speed, accompanied by the tape moving along the piping axis and controlling a certain tension。
3. Periodically perform quality checks and, when a corrosive layer is discovered, perform prompt refilling and damage repair。
4. Before polypropylene preservative tape is used, steel tube surfaces should be treated, prominent parts and angles should be scrapped and surface dust removed。
5. Base paints are important for preservation effects in subsequent periods. To mix, the paint must be evenly mixed in the container。
6. Underground paints and wind tape are prohibited in wind and sand weather or in rain, as this affects adhesive performance and leads to poor preservation。
Before tape is used, the opening temperature is more than five degrees. If the temperature is too low, it can be heated on the surface of the pipe to ensure entanglement effects。
8. Entanglement of embalming tape, which shall be balanced, with no wrinkles and fractures, and side stitches shall be parallel and shall be connected by more than 10 cm at each end of the tape link。
The above approach allows us to have better effects on polypropylene preservatives and to maintain their sustainability, so we can do the above-mentioned operations after construction, and we can do better and make our work more efficient。
From http://www. Haishuijiaodai. Com
