IfA sticky body embalming tapeWhen used, the thickness is uneven and has a certain adverse effect on the later preservation effects. Therefore, before entanglement in construction, it is essential that product quality checks be carried out so that the tape itself is not of satisfactory quality and affects the effectiveness of the construction. So what causes its uneven thickness
1. Simulator lacuna adjustments are not high in precision and the glue body is too thick or thin。
2. If the performance of raw materials is not satisfactory, the film thickness will exceed the standard。
3. Part of the heating segment (board) of the pressurized equipment is damaged and the temperature gauge is not sufficiently accurate, resulting in uneven heating of the corrosive tape of the glue body。
4. The gap in the mouth is not adjusted proportionately because, under the same gap, the entire sheeting is thin and thick。
5. The design and installation of a visceral embalming tape of a visceral body is low and, during the pipe transport, the tube is too swinging, resulting in the stretching of the film。
6. The thickness and speed of the crowding out of the film do not match the transmission speed of the pipe, resulting in uneven thickness of the film。
These are the main reasons for the thinness of the tape resistant tape of the sticky body. In order to avoid the thinness of the tape, it is necessary to exercise strict control over every link in the process of production, to ensure fundamentally the quality of the tape production and to avoid the thinness of the tape。
From http://www. Haishuijiaodai. Com
