Castro aircol pg 185 for high-temperature operation of fully synthetic gas compressor oil

China lubrication technology co., shenzhen city
159/19763337

Castro aircol pg 185
Full synthetic gas compressor oil

Product description:
Aircol pg 185 is a high-performance synthetic air pressurer oil based on polyalkyl. This air pressurized oil provides lubrication to air presses that treat hydrocarbons and other chemical gases. The product contains antioxidants and anti-corrosive additives, has good antioxidation performance and temperature stability and provides the necessary anti-corrosion protection for air presses
Protect。

Product applications:
This product has excellent lubrication performance and a high viscosity index and is suitable for high temperature operations. Aircol pg 185, which is used in fuel tanks for rotary compressors and back-to-back compressors, engages in continuous contact with gases in air presses, which, if used with mineral oil, are soluble in slides, resulting in a sharp decrease in viscosity, which can cause damage to air presses. Hydrocarbon gases are not soluble in this empty pressurized oil, which ensures that aircol pg 185 has a long time of use and excellent performance。

Application characteristics:
Aircol pg 185 applies to wider gases:
• liquefied natural gas, e. G. Methane and ethane。
Lpg, e. G., propane and butane。
Hydrocarbon gases, e. G. Ethylene, acetylene and butene。
Chemical gases such as ammonia, vinyl chloride and butadiene。

Product advantages:
Aircol pg 185 is less compatible with hydrocarbons and other chemical gases, so the viscosity and lubrication of this slide is not reduced by treating chemical gases such as hydrocarbons. Aircol pg 185 is a synthetic product that does not form rubber, resin and carbon, as mineral oils do, by decomposition or polymerization. Aircol pg 185 has a high viscosity index that can be used at extreme temperatures。

Accreditation of equipment manufacturers
Aircol pg 185 with good lubrication properties and very high viscosity index for high temperature operations. Standard requirements for the following engine manufacturers:
Sulzer/sabroe/atlas copco/nuovo pignone

Description of storage:
Please store indoors. When outdoor storage is unavoidable, the drums should be placed horizontally and covered to avoid water contamination and to ensure the integrity of the label。
Do not store in places with strong sunlight, damp, cold or more than 60°c。