Cts-8077pr pulser receiver

Cts-8077pr pulser receiver

The cts-8077p pulse-occupying receiver meets the requirements of the probe (en12668:2010) probe test system, has a very low noise and wide band receiver amplifier, and consists of advanced transmission circuits consisting of high-performance square pulse generators and high-voltage circuits。

Product introduction

The cts-8077p pulse-occupying receiver meets the requirements of the probe (en12668:2010) probe test system, has a very low noise and wide band receiver amplifier, and consists of advanced transmission circuits consisting of high-performance square pulse generators and high-voltage circuits。

Functional characteristics

• Broadband sero-pulse launcher。
  

• Pulse width ranges from 25 ns to 6500 ns, with a minimum step of 5 ns, corresponding to 80 khz to 20 mhz。
  

• Pulse voltage can be adjusted, 25v ~ 400v moves 25v。
  

• Pulse repeat frequency is optional, up to 5 khz
  

• Wideband (30 mhz) pulse receiver。
  

• 60 db rf gain, 1 db step adjustment。
  

• 50 db rf decay, 1 db step adjustment。

• 10 mhz or 30 mhz is optional for low-throughput filters。

• 1 khz or 1 mhz is optional for high-throughput filters。

• Usb interface, computer-synchronous control and provision of pc-synchronous control software and user development packages for users。

Performance indicators

Item

Parameters

Pulse type

Negative

Pulse uptime (no load)

Typical

Pulse range

(no load)

25v-400v, 25v。

Stop

50, 80, 150

Pulse width

Moveable range 25ns - 6500ns, 1000ns below 5s, 1000s above 20s

Electricity gain

60db

Decorator range

- 50 db

Pulse repeat frequency

100, 200, 500, 1000, 2000, 5,000 hz options:

0. 5 mhz probe cap of 2 khz;

0. 25 mhz probe cap of 1 khz;

0. 1 mhz op cap of 500hz

Pulse repeat frequency (external)

~5khz. External input frequencies are entered following the following limitations;

0. 5 mhz probes up to 2 khz;

0. 25 mhz probe cap of 1 khz;

0. 1 mhz op cap of 500hz

Synchronized pulse output

Ttl leveling

External trigger input

Ttl level, pulse greater than 50 ns

Signal output

1vpp

Bandwidth

1k-30mhz

Input interdiction

50 times

Output interdiction

50 times

High filtration

1 khz or 1 mhz

Low access filter

10 mhz or 30 mhz

Input output interface

T/r, r, rf output, external trigger input, synchronized output

Power

Optional 100 vac or 220 vac, 50/60 hz, out of plant code 220 vac/50 hz

Outer size

220 x 110 x 270 mm (long width)

Temperature

~50°c

Weight

3. 8 kg

Application area

Application areas:

• Probe testing: probe testing system consistent with the eu standard. Measuring the characteristics of the power exchanger。

• Metal material: to detect defects in metal components, such as cracks, gas holes, clamps, etc. To ensure product quality and safety. Other measurements used to monitor materials and processes. Thickness measurements, acoustic speed measurements, spectrum analysis, etc. Microstructure and performance of analytical materials, providing data support for the development of new materials。

• Composite materials: assessment of defects in the layers, viscosity, pore, etc. Of composite materials, which are widely applied in areas such as aerospace, automobiles, etc。

Shanghai point inspection equipment ltd. Provides instrument maintenance, instrument leasing, product inspection, technical training, product accessories selection, instrument instructions. The website chart is for reference purposes only and is based on a physical chart. In order to save your time, the price period should be directly linked to our customer service to obtain information about the product. The following brands are available: ultra, baker hughes (formerly us ge/germany kk), ovident/evident; olympus ndt, fun, central, cygnus, magnaflux, dakota, etc. Protective membrane probe: b1s b1s-en b1s-o b2s (b2siso) b2s-en b2s-ob2s-o-en b4s b4s-en b4s-o b4s-o-en b5s mb2s mb2s-en mb2s-mb4s-en mb4s-o mb5s-o mb5s-o mb5s-o seb2s seb2s mseb2s mseb2s; twin-o b2s-o-o-o-o-o-o-en-en-e4sb4s b4s b4-en seb2-e2-e2-meb4-e4-meb4-e2-e2-e2b-e2b2-e2-e2b2-e2-e2-e2-e2b2-e2b-e2b-s2-e2-e2b2b2b2b-e2-s2b2-

Recommended model

Hs710 digital ultrasound probe

Hs700 digital ultrasound probe

Hsq6 ultrasound detectors

Hs620 digital ultrasound probe

Hs600 digital ultrasound probe

Hsq8 digital ultrasound prober