Agip agip grease sm 1, sm 2 disulphide lithium

Agip agip grease sm 1

Agip agip grease sm 2

Agip grease sm lithium is dark gray and contains molybdenum disulfide (mos2). Use *** mineral base oil,*** additives and composite lithium soap as density agents。

Nature and performance

The very pure and evenly distributed molybdenum disulphides used by agip grease sm is a solid lubricant that can be firmly attached to the lubricated surface, fill a microblank and form a thin membrane; if the lubricant is squeezed out due to mechanical loads or heat stress or other reasons, the thin membrane formed may provide the necessary lubrication。

Molybdenum disulphide may be used as a back-up lubricant if it is not possible to add lubricate or to delay the process. At the same time, due to the good stability of the lubricant, it can be replaced over a longer period of time。

Apply

Ageep grease sm is a bearing for high mechanical and heat load operations, including roll bearings, where geometry can lead to wear and tear and lubrication of other problems. High mechanical loads may be due to dynamic conditions (movement loads), motor properties of the system (axis bearing vibrating equipment), etc

Ajip grease sm may be used for plants working in bad conditions as a general lubricant, and when the site is unable to access the lubricating process, the lubricating oil may only end at the beginning or at each shift。

Agip grease sm One Two

Nlgi sticky level One Two

Work penetration Dmm 280 280

Sticky level@40°c Mm2/s 160 160

Dip °c 190 190