The amber insect specimen tool, the diy model resin specimen making tool kit, drop-glazed crystals t

Diy insect amber specimen production tool, crystal locket material kit load

List:

1, rigid abm 160g 1 set

2. Equivalent electron scales 1

Three, mixer. Two

Four, straw two

5 and 3 silicone moulds (square 35*35mm 1, rectangular 68*48mm 1, rectangular 100*60mm 1)

Six, protective gloves. One

Seven, two

Production steps:

1. Clear the electronic scales and place them in a cup

2 into b 15g

3. Electronic scales zero into ajell 45g

4. Balancing ab glue even to no filament status (2-3 minutes)

5 put prepared insect specimens in the mould, down to 1/2 already mixed ab glue (with thickness required according to your needs) and wait about 5-7 hours for natural drying

6. Repeat 1/2/3/4 steps into ab glue, pending solidification

Note: the insects in the mold should be dry and dry. No moisture