Capricorn carts, plastic carts

Plastic vigil

Material: pp
Steel: p20
Module: 45#
Number of cavities: one
Fluids: cold channels
Demolition: automatically
Modular life: 300,000 times
Production time: 45 days
Guarantee period: 1 year
Packaging: wooden boxes

Pusher model design

(1) plastic shapes and wall thickness designs should, in particular, take into account the ability of the material to flow through the filling cavity and avoid tippings and gaps as much as possible。
(2) demolition slopes shall be large, ranging from 1° to 2° for fibreglass containing 15% and from 2° to 3° for fibreglass containing 30%. Forced decomposition should be avoided when it was not allowed, and a horizontal stratification would be desirable。
(3) the injection system is large and the process is straight and short, so as to facilitate the smooth distribution of fibres。
(4) the design feed should take into account the prevention of underfilling, heterogeneity deformation, uneven distribution of fibreglass, and vulnerability to adverse consequences such as melting marks. Feeds may be drawn from thin, thin, fan, circular and multi-point feed outlets to make the material flow volatile, and glass fibres may be distributed evenly to reduce heterogeneity, preferably by not using needle-style feed mouths, which may be appropriately increased in size and short length。
(5) modular cores and cavities shall be sufficiently rigid and strong。
(6) the mould shall be hard, polished, selected for grinding steel, and subject to repair。
(7) the top should be uniform and robust to facilitate replacement。
(8) the mould shall have an exhaust spill tank and may be placed in the susceptible areas of melting。

Modelling and assembly

1. We have chosen to process it with high-speed numbers control and high-speed fine sculptures, which can make the molds more beautiful。
2. Models processed at full speed are more precise and fit for assembly
3 most of the company's muzzlers follow our older employees for more than 10 years, with a lot of experience in modeling, careful installation, flattening。
4 when assembled, we use standard fittings, which can make the mold more stable during production, have a longer useful life and become easier to replace or repair at a later stage without delaying the production cycle。

Model size test

In order for the product to be properly assembled, we measure it when it's finished, and where there's a problem, or where it's not in place, changes continue to be made to ensure product alignment。

Model maintenance

Contact us

Company: crystal model
Contact: manager chan
Tel. 159900616359
Micro-credit: 159900616359
Q:930337549
Address: sang-hyun road, north huangjiang, zhejiang taizhou

I look forward to working with you