The product package has been upgraded and contact the customer service for details

I don't know

I don't know

I don't know

I don't know

Product introduction

I don't know

The brake oil detector is used to detect the quality of the brake fluid, whose percentage of water content is shown by the number of lighted led lamps on the test pen. The ft123 brake oil detector detects changes in the moisture of brake oil based on changes in the conductivity rate, which clearly shows the extent of the moisture content through the luminous diode, which can lead to lower boiling points and affect brake performance. Red light indicates that brake oil needs to be replaced, green light indicates good condition and yellow light indicates good condition。

I don't know

I don't know

 

I don't know

Performance characteristics

I don't know

Powerful, simple operations; accurate measurements and safety of use
All brake oil; automatic shutdown
Dot3/4/5 brake oil can be tested。

I don't know

 

I don't know

Product instructions

I don't know

Green: electricity ok/no water
Green/yellow: less than 1% water content
Green/yellow/yellow: water content close to 2 per cent
Green/yellow/yellow/red: water content close to 3 per cent, recommended replacement of brake fluid
Green/yellow/yellow/red/red: containing more than 4 per cent of water, hazardous, must be replaced immediately。
Note: the above data are for reference purposes only
Batteries: section 7, aaa batteries, with the battery caps opened in the direction indicated by the arrow in the test pen。

I don't know

I don't know

 

I don't know

Attention
1. Replacement of batteries is required if the green led light is not lit for long periods of time by pressing the power button
After each test pen, use a water purification test probe
3. Please do not expose brake fluids to air for long periods of time, as the brake fluids are more water-absorbing。

I don't know

 

I don't know

Prepare for testing
Spin open the lid of the brake liquid storage tank and draw the lid of the test pen. The probe will be tested for leaching into a brake fluid in a storage tank。

I don't know

 

I don't know

Water content test
Press the power button and the green led light will be lit. One second, the test results will be shown by the led light, and the test pen will automatically close in 12 seconds after the test has been completed。

I don't know

 

I don't know

Box:

I don't know

1 x ft123 brake oil test pen (excluding aaa batteries)