Logopak 4-300-3-9 v2 100186662 printing engine, germany

In germany, the logopak 4-300-3-9 v2 printing engine, 300 dpi high-precision thermal printing/thermal direct printing head, 4 inch printing width appropriate for logopak powereap 6 printing press, supports various labeling materials such as pvc/pet to meet high-speed printing requirements for industrial marking, logistics labels. The maintenance package 10018662 consists of core spare parts such as headprints, gear sets, which provide preventive maintenance and failure repair, are easily fitted for maintenance, adapt to the 5°c ~40°c industrial environment, and secure the stable operation of equipment through ce/ul certification。

Germany logopak 4-300-3-9 v2 printing engine and maintenance suite 10018662 total resolution
Core parameters and equipment compatibility
Logopak 4-300-3-9 v2 printing engine
Technical specifications:
Resolution: 300 dpi (300 points per inch) supporting high-precision label printing (e. G. Logistics labels, industry labels)。
Print width: 4 inches (101. 6 mm), appropriate standard labels (e. G. 100 mm wide labels)。
Print head type: 12 dot-printed / heat-printed head, suitable for high-speed continuous operations (print speed 100 mm/s)。
Installation location: fixed right to match the mechanical structure of the powereap 6 printer (requirement to confirm the size of the mount)。
Compatibility:
Fitr type: logopak powereap 6 (requires confirmation of equipment solidware version v2. 3)。
Media type: support labeling materials such as pvc, pet, copper version paper, thickness 0. 25 mm。

Iii. Common failures and solutions
Problem phenomena, possible causes, solutions
Print fuzzy / leak point print headbrand / filth cleaning or replace header (package 10018662 with backup header)
Label cardboard cardboard / alien card / clean gear and lubricate, check moving belt tension (recommended value: 5n)
Check the cable interface and replace the backup cable if necessary (set containing)
Print speed drops too low solid version downloads the latest solid (to contact logopak for technical support)

Maintenance suite 100186662
Core component:
Print header component: contains 12 dots of thermal header (model: lp-300-12), 250°c, with a lifetime of approximately 5 million printing times。
Gear gear groups: high-precision metal gears (module 1. 5), suitable for powerlap 6 moving systems。
Cleaning tool kit: special razors, alcoholic cotton chips, brushes for headprint maintenance。
Alternative cables: usb 2. 0 data lines (1. 5 m) to support solidware upgrades and data transmission。
Functional positioning:
Preventive maintenance: it is recommended to replace the header every 500 hours or 100,000 labels。
Fault repair: applies to such issues as head grinding, carving, ageing of cables。
Ii. A guide to installation and maintenance
Change process
Power outage: turn off the printer's power supply and wait 30 seconds to ensure that it is discharged。
Dismantling old components:
Release the right fixed screw (m4x8, twist 2. 5n. M), remove the old printing engine。
Disconnect usb with the power cable。
Installation of new components:
Align interfaces, screw screws。
Connect cable to ensure that interfaces are tight。
Initialization test:
Enter the device menu and execute the print head calibration。
Prints a test page to check whether clarity and walking paper are normal。