A 20-squawk dump truck, a dump truck for a mud factory

A 20-squawk dump truck, a dump truck for a mud factory

Technological parameters for whole vehicle size (long width high): 9,300 x 2550 x 3250 (mm)

Box size (long width high): 6300 x 2200 x 1500 (mm)

Total mass: 25,000 kg rated mass: 12305 kg ready mass: 12500 kg tyre specification: 11. 00r20 18pr wire births

Underground brand: east wind: six-emission single bridges: axial range 4350 + 1350 (mm) engine power: jades 245 ma power: 180w gearbox: large 10-pack transformer load: 6234 ml plate thickness: 6 east wind eight wheels demoved vehicle

Scope of application: building waste, household waste, dehydration sludge, poultry waste cleaning and transport. Slurry transporter, 20 slurry dumper

Box description: upper lid hydraulic pressure is on, off, tail door hydraulic locks are tight, box test drops are not leaking, responding to environmental requirements. Thickness of sheeting: application of 5 mm below 4 mm edge (heavy as may be specified): construction waste, household waste, dehydration sludge (silt), cleaning and transport of poultry waste. Self-discharge angle and height: pre-deposit self-deposit, greater than 45°, about 7. 2 m.

Product advantages:

1. Upcap hydraulics turn off (operations) and the tails hydraulics lock (water drops) respond to environmental policy requirements。

2. The box is completely sealed, it is protected against corrosion, triangulated at the interface between the edge and the floor, and the upper part of the box is stretched. (stabilized box structure)

3. The tail door is equipped with a high-density seal to ensure that the case is welded and sealed and that it is not leaked。

4. The tail of the container is equipped with a manual locking device to prevent strong mobility of sludge and manual pressure。

5. Preparation of a sewage tank at the bottom of the box, which is used for sewage discharge through a link to the pipe and the ball valve。

6. The supply side arranges for the delivery of vehicles to be used and described by the demand side to assist in the boarding of the vehicle。

Service principles: within one year of the date of purchase of the vehicle, which is based on the vehicle's registration card, within 30000 km of the user's normal operation, after strict adherence to the instructions for use, damage to the equipment of the product caused by the design, manufacture and assembly of the vehicle, after confirmation by the relevant vehicle service and supervision department。

Specific services are as follows: one, three packages of product and quality issues, free of all costs of repair (excluding lossable and electrical components). 2. Life insurance. For products beyond the period of repair, only the related cost is charged for replacement parts. 3 free training of operators: our plant arranges on-site guidance for senior engineers to study theory and practical operation; master basic theory, performance and functionality of the vehicle; procedurally proficient operation; normal routine maintenance to remove general technical malfunctions。