Import of tool-temp temperature controllers in switzerland

Import of tool-temp temperature controllers in switzerland


The production of thermostats and chillers at the main tool-temp camp in switzerland and their installations and accessories is widely used in the industrial areas of plastic aggregation, castration, cosmetics, food and beverage manufacturing。

Tool-temp microprocessing temperature control mp-888
Characteristics
Self-optimization has high reconciliation accuracy, even at high temperature
Device set independent temperature
°c or °f.
Controls standard settings proposed interface 0 - 5 v, 0 - 10 v and 4 - 20 man

Technical parameters
Functions
Set the temperature to show the required temperature
The actual temperature shows the measurement, effective accumulation temperature
Flows show l/m (uk) or gallon/m (usa)
Temperature adjustment increase/decrease index
Program design plan 3 seconds
Traffic control
Monitor (led green) traffic control activated
Led red, traffic control alert
The cooling is activated. The cooling relay is activated and it's lit
Heat start. Heat relays are activated and activated
Sensors fail. Sensors of incorrect or incorrect type are used to light up
The temperature deviation controls the difference between the temperature set and the actual temperature. The plant was set up at ±5 °c (±9 °c)
Maximum temperature when the maximum temperature is reached
External temperature control. Set values are activated externally by adjusting current/voltage

Microprocessing temperature controller mp-988
Characteristics
Self-optimization has high reconciliation accuracy, even at high temperature
Device set independent temperature
°c or °f.
It contains analogues and numeric turn-in and simulation output
Different functions can be assigned。
Large equipment can be diverted through five relays
Various interfaces ensure that communications are up-to-date

Technical parameters
Functions
Set the temperature to show the required temperature
The actual temperature shows the measurement, effective accumulation temperature
Flows show l/m (uk) or gallon/m (usa)
Temperature adjustment increase/decrease index
Program design 3 seconds for planning (procedural step 100-791)

Traffic control
Monitor (led green) traffic control activated
(led red) flow control alert
The cooling is activated. The cooling relay is activated and it's lit
Heat start. Heat relays are activated and activated
Sensors fail. Sensors of incorrect or incorrect type are used to light up
The temperature deviation controls the difference between the temperature set and the actual temperature. The plant was set up at ±5 °c (±9 °c)
High temperature when high temperature is reached
External temperature control. Set values are activated externally by adjusting current/voltage

Import of tool-temp temperature controllers in switzerland