While toilets are not new to all, they are used in our lives because they are clean, easy to use and do not take up large spaces, and are one of the essential hygiene tools, but their frequent use over time also leads to problems。
For example, when the water in the toilet is running and the water does not stop, how can it be repaired? Here's the article where ning's family will explain in detail, hoping to help you
The water in the toilet tank keeps running. How do you fix it
1. Check if the flush buttons are not returned in time at the end of their use, and if they are not, the buttons may have been in use for a long time, and the wear-in is stuck and cannot be restored, at which point only a few times will be required to repeat the buttons。
2. To see whether the lower drain valve is loose or not, causing the toilet to flow and, if it is loose, to screw up the drain valve with a screwdriver。
3. There is an impurity-induced leak in the drain valve seal, which can be removed and then cleaned or replaced。
4. Clean-up and maintenance of the water valve, where the drifting of the water valve is stuck because of the mud, the floats of the water valves can be moved by hand, so that the floats can float, the water can be stopped, and white vinegar can be used to remove the dirt from the valves and to avoid subsequent jamming。
How to save water when toilets are used
Many families do not need that much water when flushing toilets, especially when taking a piss. But the tank's storage is fixed. How do we adjust it? It's easy to fix this, just a bottle of water。
Prepare a plastic bottle filled with water, open the lid on the water tank above the toilet, then put in the jar filled with water, and then put on the lid of the water tank。
The rationale is that water bottles can account for a large part of the volume of water tanks, which is equivalent to saving one bottle at a time, thereby reducing the amount of water stored for water conservation purposes。
