Wood floor restoration: 4000606383. What if the compound floor surface breaks? Is there any way to fix it
The answer is the floor can be fixed。
The paint membrane on the surface of the floor was not damaged, but was scratched and the floor was cleaned and polished directly. Halowaxes are primarily designed to protect the glitter of the floor and to smooth the surface of the floor, thus avoiding further damage to the cut area。
In places where the floor was scarred more severely, the floor paint sheet was damaged or exposed to whiteness, which was soaked and washed up in sandpaper, the local colour was dry, the colour was dry, the brush was painted 24 hours later, the paper was polished and the floor wax was polished。
In addition, if the consumer's home is equipped with reinforced floors, it is generally less likely to cause visible scratches because of the high degree of grinding on the surface; thus, if damage occurs, it is bound to be serious, but local damage refills are not optimal. Therefore, in the event of serious damage, only full re-installation can be carried out。
(the applet has been added here, please view the front page of today)
Floor maintenance:
1 dirty: every two to three months, floor wax can be used on the floor. The waxed floor surface is not only clean and fresh, but also serves to protect paint membranes and slow ageing。
2. Painting: after three or five years of use, the floor may be repainted using the same paint as the original painting floor。
3. Clean-up: the daily cleaning of wood floors is simple, using only vacuum cleaners, wipe them with semi-wet coverings and mops, and be careful that mops are not too wet and should be dried when used. The surface of the composite wood floor consists of a thin crystal, aluminum trioxide, grinding layer, which is damaged by damage to the floor。
Therefore, if care is taken to remove wood floors and other contaminated nail polish, ink, wine, answers and nail polish cleaners and other direct cleaning agents, do not grind with sandpaper and use chemical substances such as detergents, no waxes, and paints to prevent damage to surface grinding。
If part of the composite wood floor is damaged and needs to be updated, the damaged part is removed and re-installed in accordance with the installation procedure, the new owner should be informed that the part is to be disposed of and the glue from the old plate rod should be removed。
