If the laptop is used for some time, there will be downscaling, heat dispersion, dark screens, which will cause the computer to die, and it will need dust. The laptop consists of a mainframe, monitor, hard drive, cpu and silicon. The mainframe includes the power, sound and interface parts. Let's see what we can do next。
Dismantling the hard drive, using tools to clean up the dust on the radiator hole, using specialized vacuum cleaners to clean up the silicon resin, which can be removed and the dust from the computer before it is filled。
Be careful not to break the fan on the main plate in case it is too hot. When you take off the hard drive, you can rip off all four screws on the main plate, have a screwdriver on the back of the main plate, don't be too tight when you screw them, and then you can screw them all down. In order to prevent the screws from being broken, it is important to screw them all when they are in place in order to prevent accidents during the dismantling process and to produce high temperatures on the main plate. After being removed, the radiator on the main plate, the dust in the heat hole, can be cleaned, then screw it with the wrench until it closes, because some of the dust is hard to wrench. And then fix the radiator in the radiator so that it can wrench with the wrench。
When silicon resin is installed, it can be used normally, and it is easy to clean again, and if the cpu and the memory are over-cleaned and ineffective, the cpu or memory strips can be replaced directly。
When installed, the screws on the cpu and the memory bar are wrenched with a screwdriver, then the radiator is mounted on the cpu, and the radiator is transferred to the top of the cpu with a wrench before the screws are twisted. When installed on the cpu, the fans on the cpu are transferred to a high-speed rotation, because there is a rubber cushion between the fans and the heaters on the cpu, which creates some friction on the fans, but this does not affect their normal work. When the fans turn to the high-speed rotation, then the fans on the cpu turn around, so just let the door pedals loose and slowly move the fans to a low-speed rotation。
3. Do not remove the power and sound plugs directly when installed because of the power adaptor (vga) component on the power source。
The plug is connected to the power, and the plug in the power is also connected to the power, so do not remove the power and sound plugs directly. On the right side of the interface is a small switch. A usb plugin (or usb dac) or hdmi interface can be attached to this small switch. The usb switch hdmi interface requires a dedicated power adapter (vga), such as aoc or rtx3080, while vga buys it itself, of course, by looking for a professional vga store。
4. The main plate plug above the main plate must be removed before silicate is replaced, which is the most prone to malfunction。
When you change silicon resin, you will find that the temperature of the host will increase. As you should all know, silicon is very useful, and it can protect the main plate. Therefore, before changing silicon resin, you must unload the main plate plug before it is contaminated. Otherwise, when replaced, there will be heat on the main plate, and even black smoke on the main panel。
5. Add a heating pad to the new master plate in order to prevent heat exchanges between the new and the old panel。
Silicon on the new master plate has been taken out, and you can scrape it with a knife and wipe it with paper towels. A transparent silicon silica sheet is also placed on the new master plate, fixed with toothpicks or needles, in order to prevent the exchange of silicon resin and radiator on the main plate. The heat cushion on the new main plate is used to heat silicon resin and to add silicon resin and radiator to the old main plate, in order to allow smooth access to the new main plate by the radiator and silicon resin. Finally, by adding a heat pad to the main plate, the radiator can be loaded into the new main plate. Keep an eye on the screwdriver to open up the hot mat so that the heat on the main plate can flow out smoothly。
