Ks669 also uses the international hydraulic system (ihs), which improves the reliability and performance of hydraulic systems and makes the operation of the equipment more fluid and durable. Ks669 recommended an aperture range of 90-350 mm, which is fast, rectangular and slope-crawling and meets the drilling needs of different scenarios. Be equipped with a wood engine that meets the country's three emission standards and is environmentally friendly。
Drilling: the ks669 sub-machine is equipped with drilling techniques and sophisticated control systems that allow for the location and depth control of drilling. Such drilling techniques not only ensure the quality of the boreholes, but also increase their utilization and reduce the waste of resources。
Safe environment: diffusion systems and human engineering designs for the ks 669 sub-machine. Dust removal systems can be effective in reducing dust contamination at the operational site to protect the health of the operator: human engineering designs can reduce the intensity of the operator's work and improve operational safety,
Reliable stability: the material and manufacturing process used in the ks669 sub-drilling machine, which is branded kong mountain. This has enabled ks669 to have reliable quality and stable performance and to perform well in mining operations. Both long-term continuous operations and short-term surprise operations can maintain stable performance。
Ks669 major technical parameters
Use information
Recommended aperture range (mm): single motor: 90-200 double motor: 90-350
Application of rig specifications (mm): 64/76/89x3000
Applicable shockrs: 3/4 "/5 "/6 "/8
Swing speed (rpm): 70
Nm: single motor: 3800 double motor: 4800
Progress process (mm): 3750 (mm): 1260
Advancing compensatory speed (m/s): 0. 59
Propulsive (kn): 12
High lift (kn): 30
Walk speed (km/h): 3. 0
Tape frame squared angle (°): ±13
Threshold gap (mm): 320
Mount capability (°): 32
Firewood engine: meeting national emission standards
Rating power (kw): 73. 5
Transport dimensions (mm): 6500* 2310* 2450
Weight: 6800 kg
Tank capacity: 90l
Dust collection devices: standardisation, drying, double
An open-air perforation rig with the technical capability of low energy consumption, rate, transport and field construction, the whole vehicle movement structure is achieved by a hydraulic system, with only flushing machines consuming the source of the wind, thus significantly saving the purchase cost of the entire equipment in the selection of air presses. The rotating agency has introduced a new type of double motor turnback, allowing it to maintain a strong revolving rectangular output during open-air blast drills, and to be flexible and able to climb slopes when dragging an empty press, suitable for rough site operations and for perforation. The borehole drills are perforated, simple and reliable, and are the ideal rigs in the construction of rock drilling, such as mining, roads, water and power stations。
