Technical operating protocol for the safety of a perforation drill
A perforation rig is a specialist underground excavation equipment used in soil or rocks medium
Do drilling. Because drilling involves a lot of mechanical operations and high pressure hydraulics
Systems, therefore, must strictly adhere to safety technology protocols to ensure staff safety
All of it. The following is the technical operating protocol for the safety of the perforation rig, for a total of words。
Chapter i general provisions
The first safety technical protocol for the drill is to secure the drill
Safe operation and staff safety。
The second is that all personnel involved in the drilling of a submarine must be familiar with and comply with this protocol
And related。
The third drill operator shall comply strictly with the requirements of this protocol. Fuck
No unauthorized modification or modification of the structure or working methods of the equipment shall be permitted。
The units used in the fourth hole drill shall establish a sound production management system
Increased training and supervision of the safety of personnel operating the drilling rig。
The fifth drill operator should remain vigilant during the operation, bet
To observe the operational state of the equipment and to be ready to take appropriate security measures。
Article 6 drilling rig operators found security risks or anomalies in the equipment
Operations should cease immediately and lead and maintenance staff should be reported in a timely manner
Rb。
(c) article vii leaders and relevant departments should strengthen their supervision of the operation of the drilling rig
Violations of this statute shall be promptly corrected and addressed。
Chapter ii security requirements and operating protocols for equipment
Page 1, 4 pages
Security requirements for section i equipment
The equipment must be operated by the operator of the 8th hole drill before it can be operated all
Face check to ensure that all safety devices are functional。
Article 9 drilling rig operators should wear work clothes, protective shoes, goggles, etc
Personal protective equipment and ensure its integrity。
The 10th hole drill operator should regularly tweak key parts of the equipment slide
And maintain, ensure that the equipment operates in good working condition。
The work environment of the 11th hole drill should be dry and well ventilated to ensure equipment
The electrical and hydraulic systems are functioning。
The machine should be flat when operating the equipment. Steady
Run, avoid shocks and mutations。
Section ii protocols
Article 13 drilling rig operators should carefully read the equipment before operating the equipment
The instructions are used and operated in accordance with the requirements of the instructions。
Article xiv drilling rig operators should conduct pre-test operations before operating equipment
All right, make sure the equipment works。
The 15-hole drill operator must not be left at liberty to operate the equipment
Access to the work area and the laying of miscellaneous items near the equipment are strictly prohibited。
The operator of the 16th perforation drill shall set up the equipment as required when operating the equipment
And use of safety protection equipment such as safety nets, shields, etc。
Article 17 dive
