Many of the things in our homes that have been in use for a long time, there are many problems that either can be solved by themselves or require a certain technical content and a professional presence. How should we deal with the situation of firelessness that often occurs when our stoves are used? What are the methods of repairing the gas stoves? Finding a calm solution to the problem would be efficient。
One, no fire
The burner covers the firehole, which is blocked by stains, hinders the flow of the combustioner's mixed gas and cleans up the stains of the fire; the nozzle is blocked and the nozzle is sprouted clean; the voltage vents and nozzles are blocked by rust, preventing the internal gas flow out of the bottle and replacing the qualified voltage adjusters; and the tubes are blocked by the flat-out of the gas and the straight duct. If the firing device is out of power, we can lift the stove and replace the batteries at the bottom. Gas stoves usually use cell number 1 and, in order not to affect use, a battery is available at home。
Ii. Inspection of gas sources
First, check if the gas source switch is open, and if so, check if the connection is flat or bent, if not flat or bent, pick up a boiler and see if the nozzle is on fire or if there is no fire. If the needle is not discharged, which means that the needle is malfunctioning, it should be replaced. If a needle is discharged, it indicates that the valve is malfunctioning and the valve should be replaced。
Fire detection
If it can be properly burned, it means that the pointer is in a high position, then lightly press the pointer down a few times and put it on a boiler. If there is a fire, but the flame is too weak to reach the stove, the gas pressure is too low, and a liquid gas stove is recommended to replace the new pressure reduction valve, and artificial gas and gas should be presented to the gas provider. If there is a fire, and the flame can reach it, but there is no fire, which means that the valve is blocked, please unplug the nozzle。
