Can you believe that the printer is not new to you, because it's used in our office area and home? Since the energy printer is old enough to do better than the selenium drums, which would affect the printer's normal use, how do you change the energy printer beams? This is your biggest concern, and let's look at how much it costs to replace an energy printer。
- how do you change the printer's drum
1. Turning off power
Before being better, it is certain that the printer's power supply will be shut down in order to avoid unnecessary security malfunctions when it is removed。
2. Remove selenium drums
With pliers, the metal nails on one side are removed, and we will see the selenium drums split into two parts, the magnetium is the powder part, the sensorium is the waste part, and the carbon powder in the carbon powder chamber and on the magnetic tape is cleaned out with a soft brush。
Three, set the magnetic tape
Then we re-assembly the magnets and press hard to prevent them from moving out of place. It will then be able to load the carbon powder, and when it is smoothed, it will be slowly poured into the powder tank, with a good part to fix the magnetium, and finally it will be able to gently move the gears at the end of the magnetic mill, so that they can be evenly attached to the carbon powder。
4. Replacement of selenium drums
Installation of new selenium drums. When installed, attention is drawn to the fact that the sensory drums are usually left-and-right, and that the end of the docking is fitted with gear, and the selenium drums are then fixed。
Ii. How often do you change the catapult
The life span of the kite is different because of the different sizes of the gain printer. It is not much time to do better, depending on the amount of beryllium drums or cartridges printed. If the print coverage per piece of paper is 5%, then the average selenium drum is about 2,000. If you find out that the output is light and has severe black stripes, even if you can't fix it any more, the life of the selenium drums is really at the end of the line, which will require replacement。
Iii. Prices of printer selenium drums
Dlh-436a, black selenium drums, reference price: $99
Printed: 2000 pages (5 per cent coverage)
Application type: hp laserjet p1505/p1505n/m1120 mfp/m1120n mfp/m1522 mfp/m1522n mfp/m1522nfffp
Hewlett-packard (hp) laserjet q2612a, black selenium drums, reference price: $418
Applicable type: hewlett-packard 1010, 1012, 1015 1020, 3050, m1005, m1319f
3 canon crg-328 selenium drum reference price: $429
Printed: 2100 pages
Appliance type: cf4752; cf4870dn; mf4890dw; mf4712; mf4830d; mf4720w
