How long will the water be hot when it's warm
Response: the york water machine heats the ground at a similar rate to the gas boiler. The rate of heat heating is mainly related to the manner in which indoor heat is laid, and the main factors are dry/wet-painting, routing and spacing. Normally, first use takes about 24 hours。
The york water machine warms the ground, doesn't it work better than the boiler warms the ground
The york water machine meets the national temperature for heating water, which is fully above 20°c. The yok water-borne heating is a small temperature difference in large flows, and the heating effect can meet indoor heating needs while the water-borne heating is more energy-efficient。
What do you do with warmth
Response:
1. Water machine heating: hot water is made from heat pump air conditioning and used for air conditioning heating. The heat comes from the air。
2. Warming of boilers: burning of hot water by natural gas。
3. Electricity heating: thermal heat is generated by heaters such as electro-heat membranes and heat cables。
The advantage of the warmth of york water compared to the warmth of the boiler
Response:
1. The cost of late heating using the york water machine is more than 50 per cent less than that of the conventional boiler belt。
2. The temperature of water in water heating pipes is approximately 40-45 degrees below the temperature of the boiler. While ensuring effects, prognosis also prevents the generation of water。
Water-borne heating is free of exhaust gas and is environmentally sound and safe。
4. Purchase of water machines with air conditioning or ground heating, dual-use, and saving of boiler equipment。
Water is warm without boilers and equipment is safer。
Can't you fix the plumbing once it's broken
A: yes, but it's more troublesome. The general installation was completed and the test pressure was successful, the late-stage heating pipe was not broken, the heating pipe was maintained for 50 years and the insurance company's product quality risk was covered。
How much warmer does york water heat up the ground
Response: the conventional wet shop approach is about 5 cm higher than the unpaved heating layer, and the overall height is about 8 to 9 cm above the floor and 10 to 11 cm above the floor。
How much temperature does york normally warm up? How
Response: 40-45°c. General water temperatures below 60°c do not produce water glucose and there is no special need for maintenance, which can be replaced with regular water or detergent maintenance every 2-3 years。
In the same way, why does a boiler need 55-60°c to warm the ground
Response: the most efficient boiler is at 55-60°c and the gas costs are higher if 45°c water is provided. In addition, the use of small flow temperatures in boilers requires relatively high water temperatures。
How much less expensive is the york water machine to warm the ground than the boiler? Why less
10
Can york bring a heater
It is possible that the yvas fleet of york yvas can have a maximum water output temperature of 60°c and other yvag types can have a maximum water discharge temperature of 58°c and a heating chip。
Eleven
The heating of the ground with the boiler is likely to result in increasing costs over the years. Do you think york water will warm the ground
Response: the temperature of the boiler is approximately 55-60°c, and the pipes, equipment and interior walls are prone to the formation of water sludge, reducing the heat exchange efficiency and thus increasing the cost of use. The year-to-year reduction in boiler burning efficiency also leads to an increase in the cost of use。
The york water machine warms the ground at approximately 40-45°c, and the temperature of this water does not make much of it. Moreover, the design life of the air conditioners mainframe is more than 15 years old, so there is little efficiency decline in the mainframe equipment. This will not result in incremental usage costs over the years。
Zhuo xianxing, focus on quality engineering
Telephone: 0816-238448
