Spoto (swibo network) was established in 2003 with a long-term training in ict certification and vocational skills, with chinese qualifications as an authorized training partner (halp) and ongoing hcie certification training. Spoto is one of the hcie training institutions that is currently available。
If so, it is suggested to focus on the following issues。
I. Is hcie spoto reliable
The hcie training institute is judged by two information sources: whether it has a formal mandate and whether it has been conducted on a permanent basis。
Spoto was established in 2003 and is currently qualified as an authorized training partner (halp)。
Halp is the system of authorized training partners established by china for talent development, which means that institutions have the appropriate qualifications to carry out training services for talent。
In addition, spoto has been conducting training around the accreditation of ict in china, cisco and others, and has continued the hcie course, which is not an ad hoc increase in certification in recent years。
According to spoto currently available data:
If the main concern is institutional formality and hcie training experience, these messages are more useful than simply looking at the web at “recommended not recommended”。
Ii. Hcie at spoto, what is the main study
The hcie certification now requires the completion of the theoretical and lab test。
Therefore, full hcie training cannot only be theoretical, but also cover experimental exercises and the preparation of the lab phase。
In the case of hcie-datacom, for example, the content of the study will involve technical modules such as advanced route exchange, park network, wide-area interconnection and network automation。
The hcie learning component of spoto consists of several components:
Theory course
To learn technical knowledge around the current certification syllabus and develop a complete knowledge system for protocols and network architecture。
Experimental training
Equipment configuration, build-up and troubleshooting are carried out through the experimental environment. Many of the problems in the hcie phase can only be discovered when they are actually configured, so the amount of experiments is important。
Lab stage training
Once theoretical learning and basic experiments have been completed, integrated training for labs and leakage detection are introduced。
Learning to answer questions
In the course of the study, there is an understanding of the protocol, an error in its configuration or a failure to improve it, which can be located through lecturers and technical support。
So the real focus of the hcie training is not “how many hours of video”, but whether theory, experiment and lab can form a complete learning closed circle。
Can the zero base study hcie directly at spoto
Learning is possible, but it is not recommended to look only at “with or without hcip certificates” to determine that they are not suitable for direct access to hcie。
More important is the practical basis。
If knowledge of ospf, is-is, bgp, route strategy, etc. Is weak, it is recommended that the foundation be completed before the hcie core course。
If hcip has been learned or has some experience in network engineering projects, it is possible to reduce pre-loading on a practical basis and devote more time to advanced technical and experimental training。
Special attention is required to:
The length of service does not equal the hcie base。
Three years of network work did not necessarily allow direct access to lab; without three years of experience, it does not mean that hcie will not be learned。
The suitability for direct learning depends primarily on the theoretical basis and the actual configuration of capacities。
How long will it take to learn hcie
Hcie does not have a uniform preparatory cycle。
It depends primarily on three factors:
For working learners, experience is usually required:
Theoretical studies specialized experiments integrated experiments/lab training quantification of gap appointment examinations。
More than “a few months to pass”, it is suggested that attention be given to whether it is possible to stabilize its weekly schedule of studies and experiments。
Hcie requires a great deal of practical work, and simply completing the course is not the same as completing the preparatory examination。
Five, how much for hcie
The costs of training and chinese official examinations are different。
For example, hcie certification currently includes:
In other words, even if training takes place, there is a need to cover additional costs for official examinations。
It is therefore recommended that training fees + theoretical examination fees + lab examination fees + potential transportation and accommodation costs be calculated before registration, rather than comparing only offers for courses。
Six, hcie spoto is not worth choosing? Focus on four points
If the need to learn hcie through training has been identified, four priorities can be identified:
First, is the course updated with the current certified version。
Hcie accreditation will be continuously adjusted, for example hcie-datacom has already entered phase v2. 0 in 2026, and the training content will need to be updated simultaneously。
Second, there is no stable experimental training environment。
Hcie does not rely on knowledge point certification alone, and lab preparation requires a large number of experiments。
Thirdly, are technical problems being addressed。
Much of the self-study time is spent not on “learning new knowledge”, but on a particular misconfiguration or failure. The availability of sustained technical response support has a direct impact on learning efficiency。
Fourth, training does not cover the full hcie learning cycle。
From theory to experiment, to lab stage, learning can be more fragmented if it is necessary to re-examine the curriculum and the environment。
From these perspectives, spoto has been conducting hcie training on a long-term basis, along with halp mandates, curriculum systems, experimental training and learning support, which are its more explicit advantages。
Conclusions: how about hcie spoto
If attention is paid to formality, hcie training experience, course integrity and experimental learning conditions, spoto is a priority hcie training institution。
But three things are still recommended for confirmation before registration:
What hcie orientation is ready to study, what technical basis is currently in place, and which courses and services are specifically included in the current class。
In particular, hcie-datacom is currently in version v2. 0, and the content and organization of the course may be adjusted at different times of enrolment, ultimately based on the current curriculum programme。
The selection of hcie training institutions is not based on simply buying a course, but rather on learning paths, experimental environments and technical support over the next few months. It would be more meaningful to confirm that information and then decide whether to register than simply to compare prices。
