First, you can set and start virtual w-fi hotspots, then you can enable internet connection sharing in network connection properties, and finally you can create batch scripts to open or close the hotspots, thereby allowing the windows 8 computer to share the internet。
If you want windows 8 to be wireless and other devices to be shared online, but it is found that the system does not automatically provide hot spot options, you can create it manually through an built-in command line function. The following are specific operational steps。
Working environment: yoga 7i notebook, windows 10 pro (compatible with win8 operations logic)
I. Configure and activate hot spots using command indicators
Through the command prompt for admin privileges, the virtual wi-fi adapter function of windows 8 can be enabled, the ssd and password set up and the carrier network activated, thus creating a connected wireless hotspot。
1. Move the mouse pointer to the bottom left corner of the desktop, click the right key and select the command hint (administrator) from the popup menu。
2. Enter the following commands in the command hint window and press the car back:
== sync, corrected by elderman == @elder man
Of these, mywifi is the name of the hot spot and password 123 is the password。
3. Enter the following command to start the hot spot after confirming that the virtual adapter set-up is successful:
I don't know what you're talking about
If the information is returned on the “started network”, this means that the hotspot has been successfully activated。
Ii. Setting up internet access sharing
Only the virtual wi-fi network is not enough for internet sharing, and the host's current internet connection (e. G. Wi-fi) must be shared with the newly created virtual adapter so that other devices can access the network through this hotspot。
Press the win + x combination on the keyboard to select the network connection for the adaptor interface。
Stickerbaker
Free open source ai sticker image generation tool
Download
Finds the network connection currently in use (e. G. " ethernet " or " wi-fi " ), right clicks and selects " properties " 。
3 switch to the shared tab in the attribute window, ticking to allow other network users to connect through this internet connection。
4. In the bottom drop-down menu, select the newly created virtual network adapter (usually shown as " local connection* " or " wireless network connection 2 " )。
5. Click ok to save settings and the system will automatically configure sharing。
Rapid management of hot spots through batch processing scripts
In order to avoid the need to enter an order each time, a batch file (. Bat) can be created to start or close the hotspots with a single button to improve operational efficiency。
1. Creates a new text document on the desktop and renames it as a startup hotspot. Bat。
2 right-click the file, select edit, and enter the following in the document:
I don't know what you're talking about
Use
3. Create another text document renamed to close the hotspot. Bat, edit:
No, no, no, no
Use
Double-click to run "start hot spots. Bat" to open hot spots quickly without having to repeat the input command。