Psa aerobics, which are favoured by a wide range of users because of their obvious advantages, are widely used in metallurgy, chemical, environmental, construction, light, medical, aquaculture, biotechnology and sewage treatment。
Fault security system
Configure failure system alerts and autostarts for users to ensure system operations are safe
More economical than any other oxygen supply
The psa process is a simple aerobic method, based on air, which consumes only the electricity consumed by air presses and has the advantage of operating at low operational costs, low energy consumption, etc。
Automation of integrated machine and electrical design
Import plc control is fully automated. Oxygen flow pressure purity can be adjusted and continuously shown to set pressure, flow, purity alert and achieve long-range automatic control and detection measures to achieve true unmanned operation. The control systems make the operation simpler, allow for unmanned and remote control, and allow real-time monitoring of the various conditions, thereby ensuring the integrity of the gas and the stability of the flow。
And the useful life of filling equipment
Boiler molecular sifting is filled with a “blizzard” method, so that the sifting of molecules is evenly distributed and is not easy to pollute; the adsorption towers are self-repressed by multi-stage air flow distribution and a balanced method; and the sifting of the sifting of boiling stones is kept tight, thereby ensuring that the adsorption process does not cause drift and effectively prolongs the useful life of the sifting of boiling stone molecules。
The work flow of the oxygen maker is performed by the programmable controller controlling five two-bit five lead electromagnetic valves and by the electromagnetic valves controlling the opening and closing of each of the ten gas-dynamic valves. Five two-bit five lead electromagnetic valves control the state of left, average pressure and right. The time flow of the left, average pressure and right is stored in the programmable controller, and in a power outage, the lead gas of the five-bit five lead electromagnetic valves is connected to the closing of the aerodynamic valves. When the process is in a left inhalation state, the control of the left inhaled electromagnetic valve is electrocuted and the first conductor connects the left inhalation valve, the left inhalation valve and the right exhaust valve to the opening, so that the three valves are opened and the left inhalation process is completed, while the right inhalation towers are removed. When the process is in a state of average pressure, the control electromagnetic valves are powered and the other valves are shut; the lead air is connected to the opening of the average pressure valve, which opens the valve and completes the average pressure process. When the process is in the right inhalation state, the right inhaled electromagnetic valve is electrocuted, with the first conductor connected to the right inhaled valve, the right inhaled valve, and the left inhaled valve opening, allowing the three valves to open and complete the right inhaled process, while the left inhaled towers are dehaled. In each segment of the process, other valves should be closed except for valves that should be opened。
Good fluent design, optimal use
(b) reasonable internal components, with a uniform distribution of air currents, to mitigate high-speed air current shocks
Specific molecular screening protection measures, which extend the useful life of the boiling stone molecule
Easy operation, steady operation, high automation and virtually no operation
Auto-lock oxygen drainage units to ensure product oxygen quality
(b) optimal oxygen flow, purity automatic control systems, remote monitoring systems, etc.
Air compressors: primarily used to separate oxygen and nitrogen from air. Air compressors work by compressing air and then transferring high-pressure gases to work, separating nitrogen from oxygen and obtaining oxygen. There are many car compressors currently in use in our country, mainly for motors。
3 depression adsorption: this method is mainly to separate nitrogen and oxygen from air by decomposition adsorption technology. It separates nitrogen from oxygen from air. This oxygen production is available in many parts of the country。
1. Periodically check whether the spare parts are functional and ensure that the oxygen-producing equipment is functional
2. Periodic inspection of the quantity of oxygen in the tanks and the storage of liquid oxygen
3. Periodic inspection of leaks in pipes and valves
4. Periodic inspection and clean-up of dust from oxygen storage tanks
6. Regular cleaning and replacement of filters and filter cores, etc。
