The wind pipe is the wind pipe air conditioner, which links the wind pipe to the interior, and the so-called high-pressure air conditioner is the wind transmitter used by the wind pipe air conditioner. So, what's the price schedule for the gvc? Here we go。
Price table for the glycerine a series of generic static wind pipes
Refrigeration of product name specification type (w/set) applicable area (m2) unit price (utensils/sets) plus long pipe (dollars/m)
Fgr-2. 6/a2 (large 1p) 2 60012-164600100
Glac windpipe fgr-3. 5/a2 (large 1. 5p) 350015-214900110
Glac windpipe fgr-5. 0/a2 (large 2p) 500020-275800110
Glac windpipe fgr-6. 5/a2 (small 3p) 650026-346900130
Glac windpipe fgr-7. 5/a2-n3 (large 3p) 7503-407680130
Glac windpipe fgr-12/a2-n4 (5p) 1200050-809600180
(new products)
Refrigeration of product name specification type (w/set) applicable area (m2) unit price (utensils/sets) plus long pipe (dollars/m)
Fgr-23. 3/c (small 1p) 230010 m2 under 4140100
Fgr-2. 6/c (large 1p) 260012-164320100
Fgr-3. 5/c (large 1. 5p) 350015-214620110
Fgr-5. 0/c (large 2p) 500020-275520110
Glac windpipe fgr-6. 5/c (small 3p) 650026-346930130
I. The main thing about the griff tube is that
3p, models 75 and 65. 75 big 3ps, thick vents, usually less domestic, need super thick ceilings to wrap。
2p, both large two ps, model 50, and general wall-mounted two ps。
1. 5p, both large 1. 5p, model 35, and small 1. 5p for general wall-mounting。
1p, models 26 and 23. Large 1 p and small 1 p, respectively, are rarely used. The price difference between the two is $200, and the compressor is the same. Just like the high power version of the audi 2. 0t engine and the low power version。
Ii. Frequency transformers
A room with a stable, closed environment and a long time of use in the house, e. G. A bedroom, which can be used to save electricity by a frequency machine, a living room, a dining room, a study room, a guest room, does not meet the above three conditions and is not required to use a frequency. The same model is about $800-1,000 more expensive than the normal machine。
Iii. Copper tubes
In general, copper tubes are expensive, they are too expensive, and they are better used in glyogen's copper tubes (the wind pipe itself is not equipped with copper tubes like a breaker, a wall hanger, but does not mean that gly does not have the copper pipe of the original plant). Many jss, on the pretext that glycerine did not supply the wind pipe with the original copper pipe, buy the copper pipe outside, use the thin-wall pipe, alloy copper pipe, and have problems for three years. Copper pipes are also the largest source of profit in the installation of windpipes because of the relative transparency of the prices of the windpipes themselves。
Reference to quotations
First offer: 65 model $6,000, 50 model $475, 35 model $3980 and 26 model $3680. 100 for copper pipe 3p and 80 for other
Second offer: $6,200 for model 65, $4,800 for model 50, $4,200 for model 35 and $3,600 for model 26, $110/m for copper pipe 3 p, 90,1 p for 2 p, 100, 1. 5 p
Third offer: total price of $28,000, total of $80/m for the glygen plant。
The above quotations are for ordinary machines, all of which include installation and support materials, access to wind vents, shutters, drainage pipes, holes (a large number of holes are required to penetrate walls). Note: there are three materials entering and leaving the wind: aluminum alloy paint, aluminium alloy, plastic steel. The first best, aesthetic durable. Plastic steel is a problem. It's yellow for a long time, but it's cheapest。
