The tablets, the tablets, the tablets. Board
I'd like you to consult shandong sunshine company on the 24-hour call
Since its inception, as demand from domestic and foreign markets has grown steadily, the company's production scale has expanded and now has a pc production line in asia, which is used for the production of pc sunscreens and durable panels. Our company has introduced international crowding-violet solidification-preventing water lines, using the world-renowned manufacturers of german (bayer) and saudi sabic (formerly us ge (lexan)), tested by the national chemical materials quality monitoring and testing centre, and the indicators are excellent。
The good sunboard of the smoker shows you how to distinguish the sunboard from the bad
It is important to understand the raw materials of the solar panels. The solar panels that are commonly used in the country are also known as the pc plates. The raw materials for the production of solar panels are supposed to be new, but there are now some domestic sunboard producers who, in order to save costs, add some of the old materials to the new ones, some of them using them entirely. Because of the high impurity, dust content and transparency of old materials, sun panels mixed with old materials are much less transparent and durable than those fully using new materials。
How do you know if the sunboard is mixed with old material? It is mainly to see whether there are impurities in the sunboard, such as black spots on the sunboard, crystal points indicating impurities, the more impurities, the greater the content of the old material. Good sunscreens must be clean and bright。
It is also possible to judge the quality of the materials used by looking at the fluidity of the sunboard melt。
Because of the long chain of molecules of carbonate resin, repeated high temperature melting can damage the molecular structure and degrade from large to small molecules. The old materials are to be melted again at high temperatures, and their molecular chains break, thus increasing mobility. Thus, theoretically, the quality of the material that moves better in a melting state is worse. However, it is also acknowledged that this method, although theoretically easy to understand, is difficult to operate. Users who do not have the conditions for testing can send sunboard materials to institutional testing. In addition, the weight of the board is observed, it is thick, straight and of good quality, and its poor quality is shown by the fact that it is thin and bent。
Uv layers, fog-proof drops, self-identifiable
Ultraviolet (uv) is a key factor in the ageing of the plate, and a growing number of producers now choose to squeeze the uv-resistant sunboard. “many producers now co-locate their products on the uv floor, but it is impossible for consumers to see whether the uv layer actually works. A good solar panel uv layer cannot be measured by its thickness alone, but also by the degree of homogeneity of its co-push, choosing a thick, evenly balanced uv layer of sunlight.”
In response to the appearance of uv material on the market, it was posing as complication
The phenomenon of the uv-bed sunboard shows you a small trick: to take a small piece of the sunboard and place it horizontally, to see whether there is a blue face in it, if any, indicating that it co-locates the uv layer, and if not, to suggest that the plate may not co-locate the uv layer。
Now, as sunboard technology has become more advanced, in recent years fog-diplets have emerged, and the way to identify their quality is simple, with just a glass of hot water under the plate, and if condensed water forms fog drops or drops below the surface of the plate, it shows that their fog-dips are not working well。
A 24-hour consultation call
