The vehicle light is a vital security configuration for the vehicle to travel, and the proper operation of the light not only ensures the safety of the vehicle but also provides a clear signal to other road users. The following is a detailed description of the main points of operation for the vehicle and the way in which the public view the light is opened。
There are numerous operational points for vehicle lights. The rational use of large lights is essential in different driving environments. When driving at night, when the light is so dark that it is impossible to clearly identify the state of the road ahead, the light should be activated in a timely manner. As a rule, a close-light light is applied to an environment such as urban roads, where the light is lighting up a certain distance ahead, without having a strong dizziness effect on the drivers who approach the cars. The long-light lights are applied to sectors such as the outskirts or highways where there are no street lights, which provide a wider and wider range of light, but must be switched back to the nearest light when cars meet, otherwise the strong light will blind the opposite driver instantaneously and increase the risk of accidents。
In extreme weather conditions, such as rain, fog and snow, in addition to large lights, fog lamps should be activated as appropriate. The fog lamps are highly permeable and allow other vehicles to detect themselves earlier in an environment of low visibility. In addition, in the case of intersections, turnovers, overcars, etc., the switch lights are opened in advance, as part of a broad-based, large-light operation that clearly conveys to other vehicles and pedestrians the intention to travel。
We're going to look at how the public view the lights turn on. The large light control switch on the public view is usually on the control pole on the left side of the steering wheel or on the left side of the middle console. In the case of a control pole, the control pole will be rotated forward in a row, at which point the light will be turned on and the rear and backlights of the vehicle will be activated. One more spin, close light on. If the remote light is to be turned on, the control pole can be pushed forward, at which point the remote light sign on the dashboard will be activated; when the remote light needs to be turned off, the control pole will be pulled back in place。
If the button switch rotates to the corresponding block. The first is to block the light and the second is to turn on the light. Similarly, the operation of long-lights is done by pushing the control pole forward. The following is a brief summary table of the public viewers:
Operate a control pole button
Lights
Swing forward
Turn the knob to first
Near light
One more
Turn the button to the second block
Longlight
Push the lever forward
Push the lever forward
In any case, the correct operation of the vehicle light is the skill that each driver must acquire and is familiar with the way in which a specific car type of light is turned on, such as a public view, which makes it safer and easier for us to travel。
