The water-spray platform is a dedicated part of a new water-spill vehicle developed by lake north-range specialized motors ltd.. The product, using current domestic cutting-edge technology, has improved the current hydro-dynamic structure of products currently market-based, with a significant increase in the volume, range and coverage of water, and has achieved three major innovative improvements in time- and energy efficiency. A range of 35 to 45 metres and a fog cover of more than 12 metres. The product has been patented. All the functions of the water sprayer at the back of the truck have been more or less doubled on the general-type sprinkler, and the same water or irrigation operations save more than half of the working hours, without any doubt increasing the competitiveness of your factory and product in today's high-efficiency environment. 1. Greening water cannons, which can be transposed by rotor columns or fog currents in the cannon segment, with a column range of 35-45 metres, even fog spray, are well suited for ground maintenance, green grass and ground wash, and super-high trees. The spray gun primarily applies to the working pressure of the greening cannon, which carries a large common-name pressure of 0. 6 mpa3. The greening of the water cannon column washes the flow of the spray gun ≥60l/min. 4. The greening of the spray gun range 30-45m. 5. The aluminium alloy foundry meets the requirements of gb/t9438. 6. The greening sprinkler shall consist of the carrying of a large common-name pressure of 0. 6 mpa. 7. The seals meet the hb5584 standard, the bolts used meet the requirements of gb/t3098. 1 and the nuts meet the requirements of gb/t3098. 2. 8. The water column that is sprayed by a green sprinkler can be converted into fog or column. 9. The direction of the green cannon sprayer can be rotated at 360 degrees and the vertical direction can be adjusted within 90 degrees. There are currently no standards and industry standards for common water tankers with high pressure sprayers (spray cannons), and the manufacturing of final criteria is the basis for the organization of production and delivery by enterprises, depending on their production situation and the specific requirements of the sprinklers。