Sioux factory workshop logistics corridor, orientation line

Roadlines in suzhou factory district (sidewalks, fire lanes, plant workshop, warehouse floor)

Attention is paid to the routelines in the plant area: 1, the road edges in the factory area, the road centre line, the zebra line in the man-walk, the zebra line in the factory area, the no-stop line, the guard stop line, the arrow guide, the fire escape line, etc. 2. Design works for the design of parking spaces in the factory area (private parking spaces underlined, company van paved). 3. Surfaceing of the workshop premises (standards for security of access to the plant)。
Standard dimensions of road lines in the plant area: 1 and the two-way street in the plant area are generally not less than 6 m, with a dotted middle line and a white line on the sides of the road. Internal roads within the plant are less than 6 m depending on the circumstances. The one-way plant is lined on both sides with a white line. 3. Traffic-led arrows are required in the driveway. Traffic arrow sizes are 3 m and 5 m. 4. Roadlines at the factory entrance need to be set up with a stop line。

The following are the main steps in wiring the plant: (1) safety measures: construction sections are separated by warning columns, tree-based warning signs are in front of construction, re-reflective work, etc.; (2) cleaning of roads: cleaning of roads with equipment such as brooms or wind cleaners, and cleaning of non-existent items; (3) sampling: sampled with pre-signers; (4) painting: improved binding of paints and roads; (5) painting: painting is a key step in the construction of the line, and construction techniques of the line designer directly affect the quality of the linework; (6) repair: inspection of the line after completion of the line, overhauling of the line that does not meet the requirements, removal of coatings that spill out and slide, examination of thickness, size, visuality, etc. The division of the area is based on the process of processing the products produced by the plant. The production areas for the different functions are divided on both sides of the road and isolated from the other areas by the linering of various colours. Each functional area is lined by the ground of the plant, and each operation is as undisturbed as a barrier, such as a wall. Moreover, these areas are marked with entry and exit signs, which allow workers to travel to and from the various areas, thereby regularizing the operation of the plant. The wiring of the plant and the wiring of the plant area are very important and need to be improved through rational calculations, particularly for parking spaces, to ensure that the corresponding data are available to support it. A truly reliable plant wiring will pay close attention to precision requirements and will take into account all relevant data in order to better provide the necessary wiring construction options to refine the wiring accuracy。

Contact: hui jui li telephone: 18015593357 tel: 0512-66062792 q: 277171599