Guidelines for the operation of vocs exhaust gas treatment equipment

 　　Vocs flue gas treatment equipmentAir emissions containing organic pollutants enter the boiler wheel, where most volatile organic matter is adsorbed with boiling stones on the wheel and becomes cleaner air, and these clean gases are released into the atmosphere. Most of the organic pollutants adsorbed by boiling stones enter the regenerative zone, where decomposition is completed, and the process is mainly based on the use of high-temperature air to decomposition them. After regeneration, the gas adsorbed by boiling stones becomes a high concentration of organic gases. This high concentration of organic gases enters the burner and converts the organic components into harmless co2 and water in the form of direct heat (gas) incineration for the purpose of removing organic matter。
I. General requests
1. Vocs flue gas treatment equipment shall operate simultaneously with the production process equipment producing the waste gas
2. Vocs flue gas treatment equipment is maintained at normal temperatures to ensure its normal functioning
3. It is prohibited to eject gas without treatment in a workshop
4. Daily operational maintenance and management are subject to personal responsibility, with regular maintenance
Ii. The day-to-day check system and the billing system
1. Daily spot checks of waste gas pollution control facilities must not be less than once a day。
2. Check whether the wind machine is functioning properly。
3. Examination of pipelines, vocs waste gas treatment equipment facilities for leak sites。
4. Normality of the renewable desorption temperature of the rotor adsorption device。
5. Normal combustion chamber temperature。
6. Strengthen the operational management of waste gas treatment facilities. Maintenance and maintenance records, management desk accounts, key parameters for the operation of anti-fouling facilities, relevant desk records maintained for at least three years, and desk records maintained on site for not less than one month。
Maintenance and emergency shutdown measures
1. In the event of deficiencies in the treatment capacity of vocs, the head of maintenance advises the production workshop to immediately introduce a cut-off or cut-off method to reduce emissions and ensure that the emissions are treated and met standards。
2. When the pollution remediation facility is damaged, the head of the repair of the vocs waste gas treatment equipment shall immediately notify the workshop to cease production and emissions。
3. The local environmental protection administrative authorities shall be informed immediately of the cessation of operation of the exhaust equipment due to, inter alia, an emergency or damage to equipment。
4 the equipment section regularly organizes an annual emergency response check of pollution management facilities。
Vocs flue gas treatment equipment needs to choose different treatments depending on the composition of the waste gas. For example, the adsorption of vocs waste gas treatment equipment is more effective for gases containing organisms such as benzene, toluene, and the bioprocessing vocs waste gas treatment equipment for gases containing organisms such as ethylene, acelene, etc。
From http://www. Yjfqclsb. Com