Process materials
Since they have a long history, technological maturity, simple structure, reliability of operation and ease of operation, they are widely used in ceramics, silicate products, corrosion resistant minerals, new construction materials, fire resistant materials, fertilizers, black and non-ferrous metal selections and finer grinding operations in production industries such as glass ceramics, which are self-controlled by grinding time. The motor is activated by self-retardation, which reduces the start-up current and is structured in a holistic and independent manner. This product has the characteristics of low investment, energy efficiency and energy efficiency, new structure, simplicity of operation, safety of use and reliability of performance. Combination and grinding of general and special materials. Users may consider suitable models and linings, media types, based on material weight, hardness and a combination of production factors。
Application scope
Two of the most basic of the grinding techniques commonly used for shredding materials are wet and dry puck grinding, suitable for mixing and grinding of common and special materials. Clients may consider suitable ceramic ball grinders and panels, media types based on material weight, hardness and a combination of production factors。
Advantages and characteristics
Ceramic ball grinders are used mainly for mixing materials, grinding, evenly fine products and power savings. It's either dry or wet. The machine may use different liner types depending on production needs to meet different needs。
The detail of the grinding operation is self-controlled by grinding time. The motor is activated by self-retardation, which reduces the start-up current and is structured in a holistic and independent manner. The equipment has the characteristics of low investment, less energy-efficient than the same product, new structure, simplicity of operation, safety of use and reliability of performance. Mixed and grinding operations for general and special materials. Users may consider suitable models and linings based on material weights, hardness and a combination of production factors。
Product structure
The ceramic ball grinder consists of six parts: the silo, to the mine department, to the discharge department, to the bearing department, to the moving department and to the lubrication system. The cylinder is welded by several steel plates, with french plates at both ends. The cylinder is connected through the end cap of the french plate and found steel。
The structure of the ceramic grinder can be divided into an integrated and independent form, and the ceramic grinder is easier to operate and more reliable than the rest of the grinder。
In order to facilitate the replacement of worn ceramic linings and to check the internal condition of ceramic mills, small holes were opened in the cartridge; plywood was placed between the plate and the wall of the tube in order to keep the plate in close contact with the wall of the tube and to buffer the impact of the steel ball on it; and a grinding lining made of aluminum ceramic oxide was placed in the cartridge to protect its internal surface from wear and control its motion trajectory inside the cartridge。
