Electromagnetic furnaces are now widely used as electrical appliances in kitchens. The electromagnetic furnaces are heated with electromagnetic sensors, which directly heat the bottom of the pot, thereby heating and steaming the food. Electromagnetic furnaces can make soup, hot meals, etc., and the electromagnetic furnaces are very hot, small, light and beautiful, and are used without the hazards of smoke. The creation of an electromagnetic furnace has brought many advantages to our daily lives。
The brands of the electromagnetic furnaces in the market are also like beauty, nine yang, and sopra, and benteng, and sang-hoon, and grant, and gly. Whatever brand is used, there is a risk of failure. The following is a description of the common malfunctions of the electromagnetic increment in sang yu hall and the maintenance of the malfunctions。
The electromagnetic furnace is not hot
Electromagnetic furnaces must be considered in terms of multiple factors, starting with whether there is a problem with external circuit failure or power plugging. A further situation may be due to the fact that, at one point or another, a boiler is not placed on an electromagnetic furnace or a boiler is not in the heating zone, and the electromagnetic furnace will not be hotter in such a case, because it has the ability to protect itself to automatically identify whether a boiler or whether it is suitable。
If these simple external malfunctions do not exist, they must be considered for the failure of the electrical appliances of the electromagnetic fireplace itself. And the fact that the light in the electric magnetic furnace in sang-hoon is not heated in volume, and sometimes it's dripping, shows that the sensor in the electric magnetic furnace in sang-hoon is broken and can only be replaced by a professional maintenance worker. An internal factor in the non-heating of an electromagnetic furnace in sang-hoon hall may also be that the temperature sensors automatically protect themselves to switch short circuits and should be able to wait for some time to restart the electromagnetic furnace。
Sang-tung hall's electromagnetic furnace is out of order
Sang hong hall has a dysfunctional electromagnetic furnace, sometimes pressing the button without responding. Usually, the problem is either that the key of the electric magnetic furnace is broken or that the keyboard is dirty, causing a leak, which can be solved by simply changing the key or cleaning the keyboard。
Sang-hoon's electromagnetic furnace is functioning, but it shows a malfunction code
Sang-tung's electromagnetic furnace displays the failure code, so we need to know what the failure code means before we can repair it on the wrong tip. The common emf failure code is as follows:
Fault code e0 means no pot, no pot
The malfunction code e1 indicates that the surface ntc is bad, igbt, cpu, 339 bad
Fault code e2 - ntc short
Fault code e3 - igbt ntc drive
Fault code e4 - igbt ntc short circuit
Fault code e7 - fan short-circuit protection
Fault code e8 - ct open。
Knowing the meaning of the code for failure of the electromagnetic fabricator in sang yu, it is possible to detect and repair different problems, and those who will not do so can find a professional electromagnetic fabricator to repair them。
