LaptopHow to build wifi hot spots
How do you use computers to create without a routerWifi hotHere's how the cn talent network set up a wifi hot spot for your laptop。
How does the laptop create a wifi hot spot
1. Open computer start menu - all applications
All applications
2. Open sequentially -- windows -- right-click openCommand hint- run as an administrator
Right-click to open command hint - run as administrator
3. Enter the command from an open command hint window:
I'm sorry, but i don't know what you're talking about
Press back to create a wifi hot spot called "luojun" with the password "lj123456"。
Enter, enter and return to the car for creation
4. Once the hotspot is created, then the command “netsh wlan start hostnetwork” can open the hotspot, at which point other devices such as mobile phones can be used to try to connect to the wifi network. If it is not possible to start showing the figure below, it can be opened as follows。
If you can't start the network, do it the way you want
Open the system device manager - network adapter - right-key wireless card - update the driver software - click on the selected computer to find the driver software
Click to select a computer to find driver software
6. Select from the computer 's device driver list
7. Installation from disks of each type in the display compatible hardware, with each order re-entering a serial number of 3 or 4 until the carrier network has been activated。
Select the type in order, and repeat the order number three and four for each
Loaded network started
The right-key system network icon opens the network and shares centre - change adapter settings - accessNetwork connections
Click to change adapter settings
9 at this point, a local connection to an account called luojun will be added to the network connection。
Access to network connections
10, right-click the new local connection created by the tainet-relations-shared-tick-family network connection selection
Homenet connection selection - the new local connection - then make sure
When you're sure, there's a bullet window
11, cell phone connection wifi
Phone connection wifi
12, it's done. Try it!
If you can't access the internet after connecting to wifi, you can enter command ipco with the command hintNfig/all returned, found the `dns server as graphed, entered the numbers into the newly created locally connected dns, the rest unchanged。
Dns server
Local connection - properties - internet protocol version 4 (tcp/pv4) - properties
Internet protocol version 4 (tcp/pv4) - properties
14. Enter dns server as graph