Installation and maintenance of the bukreen belt
Among the many parts of cars, belts play a crucial role. The proper installation and careful maintenance of belts is one of the keys to ensuring the proper functioning of vehicles for bek russ。
First of all, let's find out how to install the bekland belt。
Pending the installation of belts, it is necessary to ensure that vehicles are out of fire and are cooled to avoid burns. Prepare the tools you need, wrench, screwdriver, etc。
First step, find the seating position of the belt. The belts of beklan are usually located in the front of the engine and are connected to several important components, such as warp axes, pumps, generators, etc。
Step two, untie the relevant tight bolts and tightens. This requires careful operation to avoid damage to components。
In the third step, new belts are installed in the tanks in the right direction and sequence. Ensure that belts are not distorted, folded or overstretched。
The fourth step is to adjust the tightening devices so that the belt reaches the appropriate tension. This can be done either through specialized tools or in accordance with the vehicle maintenance manual。
Step five, tighten all bolts and components and check again the belt installation to make sure it is correct。
Now, let's take a look at the maintenance of the beekland belt。
It is important to regularly check the appearance of the belt. See if the belt has cracks, wears, strips, etc. If visible damage to the belt surface is found, it should be replaced in a timely manner。
Watch the belt tension. Overstretching results in slippage of belts, which affects the normal operation of components; overtightness increases wear and tear of belts and associated components。
Keep the belt clean. Avoiding impurities such as oil and dust on belts, which may accelerate the ageing and damage of belts。
Follow the vehicle maintenance manual and replace belts with the required mileage and time. In general, belts have a useful life of between 60,000 and 100,000 kilometres, but are determined on the basis of vehicle usage and environment。
A table below compares some of the features of the normal belt and the belt that needs to be replaced:
You'll need a change of belt for a normal belt
Appearance
Surface smooth, non-fissile, wear and tear
Visible cracks, wear, tear or deformation
Zhang
It's a low-strength, loose or too tight
It's too loose or too tight to adjust to normal
Working sound
The sound is normal and there's no abnormal noise
Screams, frictions or other unusual noises
In any event, the proper installation and maintenance of the belts of the beklan are essential to the performance and reliability of the vehicles. The owner should periodically inspect and maintain the belt to ensure that it remains in good working condition。
