The mechanical forms are very popular with many cousins. Although there are no batteries in the mechanical form, some simple maintenance is necessary, which is useful for increasing the life of the watch and maintaining a good core state。
Method of mechanical watch maintenance
Mechanical tables can generally be divided into two categories: manual and automated. Both are power sources driven by the hair of the core, driving gear re-drives, except in different ways. The watch is manually chained, the core thickness of which is slightly lower than that of the normal automatic chain, and the weight of the whole table is less. Compared to the automatic uplink, the automatic uplink is driven by the energy generated by the flow of the hairbar using the autodisk tortation at the base of the core, but the relative core thickness is slightly thicker than the normal manual uplink。
Method of mechanical watch maintenance
If you're always sitting in an office, you don't have enough exercise, or you're an older person, it's better not to have an automatic watch. It's a tough thing to do, but it's not an automatic statement itself. Another important issue is that, for automatic watches, they are relatively high in accuracy when they are issued, and when they stop, it is usually difficult to make them fully chorded。
The most common mechanical surface maintenance is seepage and collision. Mechanized palettes must avoid water seepage in the shell unless they are marked as waterproof, as the water content causes mechanical corrosion and is highly destructive. Water can't even touch it. Even with the indication of a water-proof watch, there is only a one-year water-proof guarantee, since the water-protective ring used for a full year, combined with unavoidable external factors such as sweat and dust, must be worn out, so a new water-protective ring must be replaced after a year, otherwise it cannot function as a water-proof shield。
Not if it's not waterproof. To the extent that economic capacity permits, it would be useful to replace two or three tables in normal life, to the extent possible, with mechanical tables for static activities, which would help to extend the useful life of the watch. It is advisable that a mechanical “medical examination” be conducted annually at a professional maintenance shop to determine whether there has been improper use or water intake. Chronic accumulation of wet heat, sweat, rain and dirty air
This is what the watch is about. It's not very comprehensive, but it's all in your mind. If you have any questions about this, you can go to the post-molecular maintenance centre in shanghai and have a professional technician to answer the questions
