Maintenance costs are low. The cost of regular maintenance is generally around $240 for oil and filtering. The constant maintenance mileage standard is the replacement of oil, filters and air filters per 5,000 km. The estimated cost of basic maintenance only for oil filters is around $300, which is within two years and 60,000 km of quality assurance。
Routine maintenance per 5,000 km beyond the quality assurance period is also reasonable. Regular maintenance components such as engine oil, filters, etc., are priced by the people for maintenance parts. Also, the supply of large market holdings of spare parts is sufficient to control maintenance costs。
The price of oil, like oil, is $50,100 for the replacement oil filter at $200,400 for 5000,100 km and $50,100 for the replacement air filter for the same oil cycle for the replacement fuel cycle. However, the actual maintenance costs may vary depending on the region, the maintenance shop and the condition of the vehicle, but are generally medium in the same grade pattern。

In addition, the official manual of the rv model shows that there is no need to change transformer tank oil during the life cycle, but the 4s store recommends that most drivers replace it at 60,000 kilometres。
Rotation maintains that korean cars are easily driven and maintained with a technical maturity that is reliable and free of pressure or that the cost of a direct blow-out final maintenance is relatively more economical. Its engine configuration carries 1. 6 l gamma and 1. 8 l nu engine 1. 6 l, with a maximum power of 127 horsepower, which provides a power output of 145 horsepower and 175 cow rice. The upgrading to an automatic six-speed transformer has automatically increased power transmission efficiency compared to the previous four speeds and further reduced usage costs by optimizing fuel economy。
In short, the choice of modern maintenance costs does not have to be too worried about being an affordable option。

What's the oil for modern turbo maintenance
The maintenance was able to select the cartoon magnetic oil, which had a visceral viscosity of 5w-20 and 5w-30, and the magnetic oil of which 75 per cent of the damage occurred within 10 minutes of opening and heat. The secret formula for the configuration of the different intelligent molecules in katoto magnetic is used to insulate the surface layer of the engine in an instant, generating unique protection against oil slicks. This molecular structure is firmly charged to the surface of the metal, which can significantly reduce damage and provide permanent maintenance for the vehicle。
Self-sniffing engines do not have a high level of oil performance. They can apply mineral oil, semi-synthetic oil, and full-synthetic oil if the purchaser has a large budget. Turbo pressurizer engines are more sophisticated than self-suction engines, have more sophisticated engines, operate with more complex standards, apply higher-grade lubricant oils, have to be well-frozen lubricated, preferably fully generated oils。

The choice of a viscosity model, in which many regions apply 5w oils in winter, is possible, but a part of the northern region (e. G. Heilongjiang province) uses as much as possible as 0w, with greater cold induction to meet local working temperatures. With regard to freezing areas, particular attention is being paid to the proposed application of the 0w series of product oils to ensure regular engine operation。
Long-term maintenance is guaranteed in cold air and in a variety of safe driving conditions and temperatures. The basic principle for the selection of engine oils is “no best, only the most appropriate”. The first is to suggest that we apply the specifications recommended by the whole-car manufacturer, and that when you buy oil, you try to match the specifications, while checking whether they are based on the corresponding certifications, such as the environmental standards of sl, sm and sn, and various performance levels. In sum, on the basis of the model specifications suggested by the producer, it is proposed that you should then choose the viscosity and level of matching, while also taking into account your economic strength。




