Forklifts are generally tool vehicles and are used only on the premises of units. As a general rule, therefore, only a post operator's certificate or an entry card is required, but the driver of the forklift is required to have a driving permit. Forklift drivers are also increasingly required to be accredited only if they are accredited. Moreover, as we formalize our mechanical enterprises, the demand for for forklift drivers is increasing in order to be able to meet the growing demand for production. Forklifts are very widely used, such as food processing, machinery production, construction engineering, etc., and require forklifts。
Scope of application: drivers of forklifts; special work permits issued by the agency are required for driving forklifts and the following safety protocols are strictly followed. Careful learning and strict adherence to operational protocols and familiarity with vehicle performance and operational area roads are essential. Basic knowledge and skills for the maintenance of forklifts are acquired and the maintenance of vehicles is carefully performed as required. There is a strict ban on driving with people, drinking and driving; no food and no talk on the way; and no phone calls on the way. Vehicles should be strictly inspected before being used and are strictly prohibited from leaving with faults and cannot be forcibly passed through dangerous or potentially dangerous sections. Before and after the forklift operation, the appearance should be checked and fuel, lubricants and cooling water should be added. Checking for start-up, operation and brake safety. Check if the lights and the horn signals are all working. Forklifts should be operated to check for normal pressure and temperature。
Forklift is an industrial moving vehicle and refers to a variety of wheeled moving vehicles for loading, stacking and short-range transport of packaged pallet cargo. The technical parameters of the forklift are used to indicate the structural characteristics and working performance of the forklift. The main technical parameters are rated gravity, payload centre distance, elevation height, door frame inclination, speed of movement, turn radius, gap from the ground, and axis, cycling, etc. Quantified weight: the nominal weight of the forklift is expressed in t (tons) when the weight of the load is not greater than the distance of the head of the forklift. When the weight of the goods on the fork is greater than the specified load centre space, the lifting weight shall be reduced accordingly due to the vertical stability of the forklift。
Forklift drivers ' duties:
Equipment maintenance is responsible for routine maintenance of forklifts, the removal of various malfunctions, the addition of fuel, lubrication systems, and the inflating of tyres, thereby keeping the forklift in good condition。
2. The safety and security of the forklift (forklift) vehicle is strictly enforced in the production of working mass stars, with regard to the movement of vehicles, the avoidance of vehicle and human casualties, the elimination of illegal forklifts, the non-wielding and the non-disturbing of goods。
3. Prior to preparation for production, check the tyre pressure of the forklift (forklift), whether the brake system meets the requirements, whether the fuel lubricants meet the requirements, whether the direction is flexible, and whether there is any risk of insecurity in the handling area。
4. In accordance with the instructions and production turnover requirements, the handling material is placed and trans-shipped in a forklift. Compliance with handling requirements。
5. On-site management has kept the environment clean, the shovel (fork) vehicle has not been parked in a random manner, it has been parked in its parts, insecurity has been reported in a timely manner, and the use of the vehicle by uncertified personnel has been eliminated。
