How do we operate in the face of the loss of the remote control in the skycat box when some users will inevitably lose control? Today, i come to share with you the response to the loss of the remote control, so that interested friends can learn more。
And when our skycat box remote is not working, we need to make sure that this remote is powered. So how do we confirm it's powered? There's an led light on the left side of the tinker bell remote control near the switch button, and we press both the "voice +" and "voice-" keys for the remote control, indicating that if the light is red, the remote control is electrical. If there is no light, it means that the remote is not connected。
Skycat box 1s remote control
If the red light is not on at this time, we need to start with the remote control battery to identify the cause of the failure, first to see if the battery is retroverted and then to sort out the battery, so that the battery does not have a normal power supply due to its looseness. If there is no back-up and no normal operation is possible after it is organized, we will try to replace a new battery. And then the remote is basically operational. If it's still electrical, then we can only seek help from the skycat boxmaker。
If the remote control is electrocuted, then we need to recode the remote control and the skycat box. How do we recode the two
And then we do it again according to the pace at which the remote control is tested for electrocution, while pressing the remote control " volume +" and " volume-" keys, at which point the led light is in a very long state, and then it becomes blinking, which will go out after a while. And then we unbutton the button and pull out the power from the skycat box. When the power is removed, then we press the remote control volume + and volume- to keep the led in a bright state and do not let go. At the same time, the power of the skycat box is inserted and if it is not possible for itself to do so, help can be sought。
After the skycat box turned on, when the video on the tv screen started, we could release two keys to the remote. At this point, the remote control led red light blinked, meaning that it began to match the skycat box. If it works, the red light will go out just a few times. That's when we'll be happy to continue using the skycat box. The process seems cumbersome, and it's really simple。
