1.
Workshop level ii maintenance promotional work
200
I don't know
300
In order to ensure that production is carried out in a normal manner and that the health of the employees is maintained, the employees of the car repair plant must comply with the safety system。
1. All employees of the factory must comply with the safety technology operating protocol and no one may violate it。
2. Work shall not be carried out without permission, in a factory, in pursuit of, or out loudly, and without the need for work shall not be permitted
Departments move around and chat and do not allow children to enter the factory。
3. Labour protection supplies must be worn as required. Smoking is strictly prohibited in workshops。
No vehicles may be used other than those required for work and shall not be driven at any speed beyond the plant
5km/h
No brakes at the factory。
5. Strengthen the management of flammable articles and store them in designated locations, except in service。
Vi. Workstations should be equipped with adequate fire-fighting equipment and maintenance should be enhanced and maintained in good technical condition, with all staff
The correct use of fire extinguishers should be learned。
Vii. Worklights should be low pressure (
36v
(a) safety lamps, which must not be used by rain or by dragging water, and are regularly checked for guidance
Is the line, the plug good。
8. No power switches or power plugs shall be moved when hands are wet. Power lines, fuses shall be installed in accordance with regulations, and no copper wire shall be used
Iron wire instead。
9. All electrical equipment must be cut from the former level i power switch before working hours。
Upon completion of operations, the site is to be cleared of oil-contaminated items in a timely manner, and equipment is to be fully equipped in designated locations to maintain construction
Site clean。
2.
The unit's broken
How
:: carefully enforce the division of labour and responsibility for the maintenance and maintenance of electrical and electrical equipment, and strictly comply with company regulations and equipment
Protect
Inspection protocols to ensure quality, mastery of the principles, performance of unit electrical equipment, various protective devices and failure maintenance。
Due responsibility for work, loyalty and excellence in business. Problems identified are resolved in a timely manner. Within the division of labour
Electrical lines, equipment and facilities remain in good state of maintenance to ensure that they operate without fault。
And is responsible for the maintenance, repair and repair of electrical and mechanical equipment under its jurisdiction. Strict adherence to maintenance protocols to ensure that the equipment is operating well
The back-up equipment is in good use and meets the standards for the intact equipment. Increased security awareness, strict prohibition of violations of operational protocols and pre-maintenance wear okay
(c) labour security supplies. The security regime is strictly enforced and there is a right to refuse to command violations. Maintenance of equipment, tools and materials for various tasks
Safe custody and use, and no equipment accidents or personal accidents。
Responsible for the installation and use of electromechanical equipment, and has the right to demand that the person concerned be forced to repair and maintain it. And education
Provide guidance to operators on the handling, running, running and maintenance of equipment, and on the completion of equipment use and simple maintenance work; continuously raise
Level of daily maintenance for high-level employees. Precautionary maintenance, maintenance arrangements and planning are in place。
(c) respect for labour discipline, strict job discipline and problems with electrical and mechanical equipment. We're going to do it in time
For maintenance, the leadership is requested in a timely manner to arrange overtime or continue maintenance the following day。
3.
Related
Tpm
♪ a poem recited ♪
Solemn undertaking
Tpm
Full production maintenance
1.
Self-sustainment
Self-maintenance is the maintenance and maintenance of equipment by each operator, who conducts routine check-ups, refuelling and refuelling
Spare parts, repairs, early detection of malfunctions and correction accuracy, etc。
Self-sustainment is carried out in seven steps: initial clean-up, solutions to problems of origin and distress, development of interim standards of self-sustainment
Final implementation of general, autonomous, standardized and autonomous management。
2.
Individual improvements
