How to createWifi hotWhat?
Wifi hotspots refer to the conversion of a cell phone receiving a gprs or 3g signal into a wifi signal, so that the mobile phone becomes a wifi hotspot. Cell phones have to be wired to be hot. Some systems have built their own hot spots, such as ios (iphone4)。
Here we goThe notebookSets the wifi hotspot step。
First, confirm that your wireless card is available. In the start menu, you can find " all programs " -- " attachments " -- " command prompts " , and " running as administrator " right。
Enter "netsh wlan set hostnetwork mode=allow ssid=testkey=0123456789" in the "command alert" and return to the car, where the system automatically virtualizes a wifi hotspot。
3 at this point, open the network and the shared centre and click on the change adaptor settings on the left side and see an extra card。
4. Click right on local connection and click properties。
5. Switch to sharing, tick in the first box and select in the bottom selection boxWireless connection2, ok。
6. Enter "netsh wlan start hostnetwork" also in the command hint, and return to the car and open the wifi hotspot。
7 enter "netsh wlan stop stopped networkwork" in the command hint and return to the car and close the wifi hotspot。
Note: "ssid=" followed by the wifi hotspot name, "key=" followed by the password, which must be eight or more。
This is the introduction to the laptop setting wifi hotspots, how to build wifi hotspots, hopefully to help you!
