Frontline extension for xian hail air conditioning maintenance (sian haile air conditioner):
The 24-hour maintenance of air conditioners in the central air conditioner service of zyang hair must be protected from dusting into the interior of the equipment during renovation to affect the performance of the air conditioner; in addition, it must not be less than 1 centimetre away from the roof of the room, so as to avoid resonance with the wall when the equipment is running; the drainage pipe should be kept at a certain gradient to ensure smooth discharge; the installation of air conditioners should be followed by the containment of indoor machines, refrigerant distribution pipes, condensation units, electrical wires, etc., in the ceilings, and the retrofitting of the air conditioner system after the installation of the air conditioner has been completed. It is important to note that, during the acceptance process, care must be taken to prevent the leakage of refrigerants and the presence of water leaks in the condensed pipe system. Periodically check whether there is an alien jamming in and out of the central air conditioners and, if necessary, check whether the power plugs and the power plugs in the central air conditioners are loose or defunct if they must be cleaned up in a timely manner so as not to affect their use. The central air conditioner is operated on a regular basis every month, even during the recurrent season, in order to avoid lubrication in compressors。
• compressor alarm input, high-pressure alert, 24-hour contact: two, three, pick-up, martial arts, alcohol, three, three, indoor fan feedback alert; compressor alarm input, if called, alarm; check if pressure protection and connection are intact; and check if the sequence and sequence are wrong. High/low pressure alert, check the correct location of the indoor tube temperature sensor network in case of failure. Indoor fan feedback alerts, if operated in 15 seconds, check if the internal fan feedback line is connected correctly. Accompanying the heating room with the design of an overheating alarm for wind machines and the inspection of an economic overheating shield。
Knowledge development:
