Specialized vehicles inc
After east flow t5**, 8 xue was accompanied by 12 tons hang
Sqs 300-4, with 12 tons of 4-band crane, lift 14. 5 metres above altitude, work radius 12. 5 metres, work radius 2. 5 metres 12,000 kg, work radius 4. 5 metres 6000 kg, work radius 7 metres 3500 kg, work radius 9 metres 2,700 kg and work radius 12. 5 metres 1800 kgg. The main arm of the crane turns at 360 degrees, and the leg stretches to hydraulics
Box size: 8,400*2450*600, base plate thickness 4mm (manganese steel) and plate thickness 3mm (manganese steel)。
East wind t5 configuration of the chassis of the vehicle: using the t701 driver's room, 180 horsepower motors, eight gear gear gear gears, 5. 5 tons for the front bridge, 11. 5 tons for the rear bridge, 300 mm three floors straight through the beam, 1,000 steel wires for the whole vehicle, with the original plant's puller, abs, carlogs, remote control doors, lower protection, eight-word beam hooks, aluminium alloy tanks, with the new 2018 regulations requiring configuration。
Three-one-one-one-one-two tons of straight arms hanging with a vehicle, with a crane type: sps-30,000 with a double-pump hydraulic system that is operationally efficient, structurally optimal, lighter and more transportable. Start weight: 12 tons, arm length: 14. 8 m, arm frame form: straight arm, height: 16. 5 m。
He hung 12 tons of four-arms cranes with his vehicle, the hanger type: sqs 300-4, 12 tons of four-arms cranes with his vehicle, raised 14. 5 metres above altitude, working radius: 12. 5 metres, working radius: 12,000 kg with 2. 5 metres, working radius: 4. 5 metres with 6000 kg, working radius: 3,500 kg with 7 metres, working radius: 9 metres with 2700 kg and working radius: 12. 5 metres with 1800 kg. The main arm of the crane turns at 360 degrees, and the leg stretches to hydraulics
Components and uses of the hanging
1. The lifting arm stretches through the hydraulic tank and the hook slider hangs from the arm**。
2. The load indicator indicator indicator indicates the total load in the vehicle's chassis empty state for various lifting arm lengths and for the angle of the lifting arm。
3. The rolling agency rotation agency is driven by hydraulic motors and lifts or lands heavy matter through a steel wire。
4. The pillars support the lifting arm, the roller structure and the transformer tank, which is carried by the rotary system。
5. Revolving systems typically include hydraulic motors, hydraulic speed-reducing boxes, etc., which allow the revolving of columns。
6. The frame base is installed directly on the chassis of the vehicle and supports the pillars and leg frames。
7. Hydraulic tanks contain hydraulic fluids that are specially used for the lifting of vehicles and serve as dissipation and deposition filters。
(a) a car-cliper: 1. A car-clip driver must undergo professional training in the safety and operation of the vehicle, with the approval of the relevant department and the issuance of a qualified operator's certificate before performing a separate operation. It is strictly forbidden for persons who are not licensed and who do not know how to carry a car to use a crane. 2. Prior to carrying out a lifting operation, each operating unit shall be checked for normality, whether the wire ropes are in line with or solid and conform to operational standards; and whether the brakes, hydraulics and safety devices that accompany the vehicle are complete and sensitive. It is strictly forbidden to operate with equipment, such as parts and components hanging from a car. 3. The crane hanging with the vehicle shall have a lifting arm of not less than 30° and, in the case of loads, the crane shall, as far as possible, avoid landing on the crane's lifting arm. It is strictly forbidden to change the lever before the crane's arms rise and fall. 4. The pick-up driver and the person performing the lifting work must work closely together and follow the signal command of the person in the field. Before a crane operation with a vehicle, a loudspeaker must be sounded. If a commanding officer is found to have a poorly or wrong handle, the crane operator or driver shall have the right to refuse to perform it. In a crane operation with a vehicle, an emergency parking signal from the crane must be stopped immediately, pending the removal of any insecurity. 5. The operator of the car was required to comply with all traffic regulations and related regulations and to prohibit the driving of cars after drinking. When driving, no smoking, no diet and no talk. 6. When lifting heavy objects during a crane operation, heavy objects shall first be suspended from the ground by approximately 10 cm, checking the stability of the crane and the performance of brakes, etc., in a flexible and effective manner, in order to continue the work under normal conditions。
-/gjjehg/-
Welcome to the website of zero motors inc., which is located in an all-state city known as “the kingdom of handong” and known as “the city of gu, qui, america, new”. The address is the cheng jian automobile industrial park, located in yuzhou, hubei province, and headed by cheng aro。
The mobile phone is 15586882655, and the main operating vehicle company is the core company under the banner of hubei luong li group, a major car manufacturer for all types of specialized vehicles, a professional provider, a refueller, a milk transporter and a blender。
The funds registered in the unit are more than rmb 100 million。
